Hikvision Surveillance Network Configuration Guide229

IntroductionHikvision, a leading provider of surveillance solutions, offers a comprehensive range of network cameras, NVRs, and other devices. Configuring these devices properly is essential for ensuring optimal performance and security. This article will provide a step-by-step guide to configure a Hikvision surveillance network.

IP Address ConfigurationThe first step is to assign IP addresses to the devices on the network. This can be done through the device's web interface or using the Hikvision iVMS-4200 client software. To configure the IP address using the web interface, follow these steps:
Open a web browser and enter the IP address of the device into the address bar.
Log in to the device using the default username and password (admin/12345).
Navigate to the "Network" tab.
Click on the "TCP/IP" tab.
Enter the desired IP address, subnet mask, and gateway address.
Click on the "Apply" button to save the changes.

Port ConfigurationOnce the IP addresses have been configured, the next step is to configure the ports that the devices will use to communicate with each other. By default, Hikvision devices use the following ports:
HTTP: 80
RTSP: 554
RTMP: 1935
ONVIF: 8080

These ports can be changed if necessary. To configure the ports using the web interface, follow these steps:
Open a web browser and enter the IP address of the device into the address bar.
Log in to the device using the default username and password (admin/12345).
Navigate to the "Network" tab.
Click on the "Advanced" tab.
Enter the desired port numbers.
Click on the "Apply" button to save the changes.

Firewall ConfigurationTo ensure that the devices on the network can communicate with each other, it is important to configure the firewall properly. The firewall should allow traffic on the ports that are used by the devices. To configure the firewall using the iVMS-4200 client software, follow these steps:
Open the iVMS-4200 client software.
Click on the "Configuration" tab.
Click on the "Firewall" tab.
Select the "Enable" checkbox.
Enter the desired port numbers.
Click on the "Apply" button to save the changes.

Testing the ConfigurationOnce the configuration is complete, it is important to test it to ensure that the devices are communicating properly. This can be done by using the iVMS-4200 client software to connect to the devices. If the devices are communicating properly, the live video will be displayed in the iVMS-4200 client software.

ConclusionConfiguring a Hikvision surveillance network is a relatively straightforward process. By following the steps outlined in this guide, you can ensure that your devices are communicating properly and that your surveillance system is operating at optimal performance.

2024-10-23

Previous：Hikvision Microphone Wiring Diagram

Next：Dual Monitor Color Recommendations: Optimizing Your Visual Experience