Lechange Monitoring Storage Card Installation Guide186

In this guide, we will walk you through the process of installing a storage card in your Lechange monitoring device. By adding a storage card, you can record and store surveillance footage, providing an extra layer of security for your home or business.

Step 1: Gather MaterialsBefore you start, you will need the following materials:
* A Lechange monitoring device
* A microSD card (up to 128GB capacity)
* A Phillips head screwdriver

Step 2: Remove the ScrewsUse the Phillips head screwdriver to remove the two screws located on the back of the monitoring device. These screws hold the back panel in place.

Step 3: Open the Back PanelOnce the screws are removed, carefully lift the back panel away from the device. You may need to use a small flat-head screwdriver to gently pry it open.

Step 4: Locate the microSD Card SlotInside the back panel, you will find a microSD card slot. It is usually located near the bottom of the device.

Step 5: Insert the microSD CardAlign the microSD card with the slot and gently push it into place. Make sure that the card is fully inserted until it clicks into place.

Step 6: Format the microSD CardOnce the microSD card is inserted, you need to format it to prepare it for use. To do this, power on the monitoring device and access the settings menu. In the settings, navigate to the section for storage and select the option to format the microSD card.

Step 7: Close the Back PanelAfter formatting the microSD card, close the back panel and tighten the screws to secure it.

Step 8: Check the Recording FunctionOpen the Lechange monitoring app on your smartphone or tablet. Select the device and navigate to the playback menu. You should now be able to see the recorded footage from the microSD card.

Tips* Use a high-quality microSD card with a fast write speed to ensure reliable recording.
* Regularly check the microSD card and replace it if it becomes full or damaged.
* If you have any difficulties installing or using the storage card, refer to the user manual or contact Lechange support.

Troubleshooting* If the microSD card is not recognized by the device, try restarting the device or reformatting the card.
* If you are unable to record or playback footage, check the microSD card's write speed and capacity.
* If the recorded footage is corrupted or missing, try replacing the microSD card or contacting Lechange support.

2024-11-05

Previous：Shangqiu Expressway Monitoring Pole Function Settings

Next：How to Install a Security Camera on a Bus [Step-by-Step Tutorial]