How to Set Password for Blurry Monitoring Device372

If your monitoring device is blurry, it may be because the password has not been set up correctly. Here are the steps on how to set up a password for your monitoring device:

Step 1: Gather your materials.You will need the following materials:
* Your monitoring device
* A computer with an internet connection
* A USB cable

Step 2: Connect your monitoring device to your computer.Using the USB cable, connect your monitoring device to your computer.

Step 3: Open a web browser.On your computer, open a web browser.

Step 4: Enter the IP address of your monitoring device into the address bar.The IP address of your monitoring device can be found on the bottom of the device.

Step 5: Press Enter.This will open the login page for your monitoring device.

Step 6: Enter the default username and password.The default username and password for most monitoring devices are "admin" and "password".

Step 7: Click the Login button.This will log you into the settings page for your monitoring device.

Step 8: Navigate to the Password tab.The Password tab is usually located in the System Settings section.

Step 9: Enter a new password in the New Password field.The password must be at least 8 characters long and contain at least one uppercase letter, one lowercase letter, and one number.

Step 10: Re-enter the new password in the Confirm Password field.This will ensure that you have entered the password correctly.

Step 11: Click the Save button.This will save your new password.

Step 12: Logout of the settings page.Click the Logout button to logout of the settings page.

Step 13: Try logging back in with your new password.Enter your new password in the Password field and click the Login button.
If you are able to log in successfully, then you have successfully set up a password for your monitoring device.

2024-11-05

Previous：How to Set Up Sleep Time for Mijia Surveillance Devices

Next：How to Set Up Monitoring Devices Without Recording on a Foscam Camera