How to Replace the Hard Drive in a Xiaomi Router210

In this tutorial, we will go through the steps on how to replace the hard drive in a Xiaomi router. This is a relatively simple process that can be completed in around 30 minutes. Before we begin, you will need the following:
A new hard drive
A screwdriver
A pair of tweezers or needle-nose pliers

Once you have gathered the necessary tools, follow these steps:Step 1: Power down the router and unplug it from the power outlet.

This is important for safety reasons. Once the router is powered down, you can proceed to the next step.Step 2: Remove the back panel of the router.

There will be a few screws holding the back panel in place. Use the screwdriver to remove these screws, and then carefully lift off the back panel.Step 3: Locate the hard drive.

The hard drive will be located inside the router, usually in the bottom or back of the device. It will be a small, rectangular device with a SATA connector.Step 4: Disconnect the hard drive from the router.

Use the tweezers or needle-nose pliers to carefully disconnect the SATA cable and power cable from the hard drive. Once the cables are disconnected, you can remove the hard drive from the router.Step 5: Install the new hard drive.

Take the new hard drive and connect the SATA cable and power cable to it. Then, carefully insert the hard drive into the router. Make sure that the hard drive is securely seated in the connector.Step 6: Replace the back panel of the router.

Once the new hard drive is installed, you can replace the back panel of the router. Make sure to tighten the screws securely.Step 7: Power on the router and log in to the web interface.

Once the router is powered on, you can log in to the web interface using your username and password. Once you are logged in, you can go to the "Storage" section of the web interface to format the new hard drive.Step 8: Format the new hard drive.

In the "Storage" section of the web interface, you will see a list of all the hard drives that are connected to the router. Select the new hard drive and click the "Format" button. This will format the hard drive and make it ready to use.Step 9: Copy your data to the new hard drive.

Once the hard drive is formatted, you can copy your data to it. You can do this using a file manager or by using the "File Sharing" section of the web interface.Step 10: Enjoy your new hard drive!

Once your data is copied to the new hard drive, you can start using it. The new hard drive will provide you with more storage space and faster performance.

2024-11-04

Previous：How to Install a Home Security Camera

Next：What is POS Setup Monitoring and Why is it Important?