Chi Bi Monitoring Installation Video Tutorial334

Introduction

Welcome to the Chi Bi Monitoring Installation Video Tutorial. In this tutorial, we will guide you through the step-by-step process of installing a Chi Bi monitoring system. We will cover everything from unboxing the equipment to connecting the cameras and setting up the software.

Unboxing the Equipment

The first step is to unbox the equipment. The Chi Bi monitoring system comes with the following components:
NVR (Network Video Recorder)
Cameras
Power supply
Ethernet cables
Mounting hardware

Connecting the Cameras

Once you have unpacked the equipment, you need to connect the cameras to the NVR. To do this, follow these steps:1. Connect the power supply to the camera.
2. Connect an Ethernet cable from the camera to the NVR.
3. Repeat steps 1 and 2 for each camera.

Setting Up the NVR

Once the cameras are connected, you need to set up the NVR. To do this, follow these steps:1. Connect the NVR to a monitor or TV.
2. Connect the NVR to a power source.
3. Turn on the NVR.
4. Follow the on-screen instructions to set up the NVR.

Accessing the System

Once the NVR is set up, you can access the system from a computer or mobile device. To do this, follow these steps:1. Open a web browser and enter the IP address of the NVR.
2. Enter the username and password that you created during setup.
3. You will now be able to view the live video from the cameras.

Troubleshooting

If you are having any problems installing or using the Chi Bi monitoring system, please refer to the troubleshooting guide in the user manual. You can also contact Chi Bi technical support for assistance.

Conclusion

Thank you for watching the Chi Bi Monitoring Installation Video Tutorial. We hope this tutorial has helped you get your system up and running quickly and easily. If you have any further questions, please do not hesitate to contact us.

2024-10-31

Previous：How to Set Up Remote Viewing for Analog Surveillance

Next：Latest Standards for Campus Surveillance System Setup