HB Surveillance Installation Guide with Illustrations110

Introduction

HB Surveillance is a leading provider of security and surveillance solutions, offering a wide range of products including cameras, recorders, and surveillance software. This guide will provide step-by-step instructions with illustrations on how to install an HB Surveillance system.

Before You Start

Before beginning the installation, ensure you have all the necessary equipment, including:
HB Surveillance camera
HB Surveillance recorder
Power supply for camera and recorder
Network cables
BNC cables
Screws and mounting hardware

Step 1: Install the Camera
Choose a suitable location for the camera, ensuring clear visibility of the area you wish to monitor.
Mount the camera using the included mounting hardware.
Connect the power supply to the camera.
Connect a BNC cable from the camera to the video input of the recorder.

Step 2: Install the Recorder
Place the recorder in a secure location with good ventilation.
Connect the power supply to the recorder.
Connect network cables from the recorder to your router or switch.
Connect a monitor to the recorder using an HDMI or VGA cable.

Step 3: Configure the System
Power on the recorder and monitor.
Log in to the recorder's web interface using the default username and password (usually admin/password).
Add the camera to the recorder by selecting the "Add Camera" option and following the on-screen instructions.
Configure recording settings, such as frame rate, resolution, and motion detection.

Step 4: Monitor Your Surveillance System
Open the surveillance software on your computer or mobile device.
Log in to the system using the same username and password you used to configure the recorder.
View live footage from the cameras or access recorded footage by selecting the appropriate options.

Troubleshooting
No video signal: Check if the BNC cable is securely connected to both the camera and the recorder. Also, verify that the camera is powered on.
Cannot log into the recorder: Reset the recorder to factory settings by pressing the "Reset" button on the back of the unit. Use the default username and password (usually admin/password) to log in.
Poor image quality: Adjust the camera lens to achieve optimal focus. Ensure that the camera is installed in a location with sufficient lighting.

Conclusion

By following these steps, you can successfully install and configure an HB Surveillance system to monitor your property or business. If you encounter any difficulties during the installation process, refer to the troubleshooting section or contact HB Surveillance support for assistance.

2025-02-25

Previous：How to Set Up Log Monitoring

Next：Securing Zones with Alarm Monitoring