Tesla No-Drill Dash Cam Installation Guide330

Installing a dash cam in your Tesla can provide you with peace of mind and valuable footage in the event of an accident. However, many traditional dash cam installations require drilling holes or using adhesive mounts that can damage your vehicle's interior. Fortunately, there is a way to install a dash cam in your Tesla without causing any harm.

What You'll Need* USB-powered dash cam
* Tesla Tap fuse adapter
* Pry tools
* Microfiber cloth

Choosing a Dash Cam

When choosing a dash cam for your Tesla, there are a few things to keep in mind:* Resolution: Choose a dash cam with a high resolution (at least 1080p) for clear footage.
* Field of View: Opt for a dash cam with a wide field of view to capture as much of the road as possible.
* Night Vision: Consider a dash cam with good night vision capabilities for capturing footage in low-light conditions.

Installing the Tesla Tap

The Tesla Tap is a fuse adapter that allows you to power your dash cam without splicing into any wires. Here's how to install it:* Park the Tesla in Park and turn off the engine.
* Locate the fuse box under the front trunk.
* Identify the "ACC" fuse (usually in slot F36).
* Remove the ACC fuse using the pry tools.
* Insert the Tesla Tap into the fuse box slot.
* Reinsert the ACC fuse into the Tesla Tap.

Mounting the Dash Cam

Once the Tesla Tap is installed, you can mount the dash cam. Here are two methods:1. Suction Cup Mount
* Clean the windshield where you want to mount the dash cam.
* Remove the suction cup cover and press it firmly against the windshield.
* Secure the dash cam to the suction cup.
2. Sticky Pad Mount
* Clean the dashboard where you want to mount the dash cam.
* Remove the backing from the sticky pad and press it firmly against the dashboard.
* Secure the dash cam to the sticky pad.

Connecting the Dash Cam* Connect the dash cam's power cable to the Tesla Tap.
* Conceal the extra cable by tucking it under the headliner or dashboard trim.
* Start the Tesla and verify that the dash cam is powered on.

Setting Up the Dash Cam

Once the dash cam is installed and connected, you can set it up according to the manufacturer's instructions. This typically involves formatting the memory card, setting the time and date, and adjusting the recording settings.

Tips* Use a microfiber cloth to clean the windshield and dashboard before mounting the dash cam.
* If you encounter any difficulties during the installation process, refer to your Tesla's owner's manual or consult a qualified mechanic.
* Test the dash cam after installation to ensure it is functioning correctly.

Conclusion

By following this guide, you can install a dash cam in your Tesla without any drilling or damage. This simple and effective installation method will provide you with the peace of mind and footage you need to protect yourself and your vehicle.

2025-02-25

Previous：Where Are the Settings?

Next：Speed Monitoring on the Road: A Comprehensive Video Guide