Lenovo Monitoring Room Installation Guide334

## Introduction
This guide provides step-by-step instructions on how to install and configure a Lenovo Monitoring Room system. The system consists of the following components:
* Lenovo ThinkSystem SR650 or SR670 server
* Lenovo ThinkAgile HX3310 or HX5310 hyperconverged appliance
* Lenovo ThinkSystem DE Series storage array
* Lenovo ThinkAgile XClarity Administrator management software
## Prerequisites
Before you begin, ensure that you have the following:
* A compatible server or hyperconverged appliance
* A compatible storage array
* A copy of the ThinkAgile XClarity Administrator software
* A network connection for each component
## Installation


Hardware Installation
1. Rack and power on the server or hyperconverged appliance.
2. Connect the server or appliance to the storage array.
3. Connect the server or appliance to the network.


Software Installation
1. Install ThinkAgile XClarity Administrator on the server or appliance.
2. Configure the server or appliance as a Monitoring Room server.
3. Add the storage array to ThinkAgile XClarity Administrator.
4. Configure the storage array for use with Monitoring Room.
## Configuration


Monitoring Room Server
1. Access the Monitoring Room server's web interface.
2. Configure the server's network settings.
3. Configure the server's NTP settings.
4. Configure the server's SMTP settings.


Storage Array
1. Access the storage array's web interface.
2. Configure the array's RAID settings.
3. Configure the array's volume settings.
4. Create a storage pool for use with Monitoring Room.


ThinkAgile XClarity Administrator
1. Access the ThinkAgile XClarity Administrator web interface.
2. Configure the Monitoring Room app.
3. Add the Monitoring Room server to the app.
4. Add the storage array to the app.
5. Configure the storage pool for use with Monitoring Room.
## Deployment
Once the Monitoring Room system is configured, you can deploy it. To do this, follow these steps:
1. Create a monitoring room.
2. Add cameras to the monitoring room.
3. Configure the cameras' settings.
4. Start recording.
## Troubleshooting
If you encounter any problems during installation or deployment, refer to the following troubleshooting tips:
* Check the network connections.
* Ensure that the server or appliance is compatible with Monitoring Room.
* Ensure that the storage array is compatible with Monitoring Room.
* Check the software configurations.
* Contact Lenovo support for assistance.
## Conclusion
By following these instructions, you can successfully install and configure a Lenovo Monitoring Room system. The system will provide you with a comprehensive monitoring solution for your physical security needs.

2025-02-12

---

Previous：Monitoring Network Access Configurations

Next：What is the Correct Way to Set Up an AJ Surveillance Camera?