How to Set Up Parking Mode on Your Roadcam241

If you're looking to beef up your vehicle's security, a roadcam with parking mode is a great option. This mode allows your camera to keep recording even when your car is parked and turned off, so you can have peace of mind knowing that you're protected from hit-and-runs, vandalism, and other incidents.

Here's a step-by-step guide on how to set up parking mode on your roadcam:

1. Check Your Camera's Compatibility

Not all roadcams have parking mode, so the first step is to check if yours does. You can usually find this information in the camera's manual or on the manufacturer's website.

2. Get a Hardwire Kit

Parking mode requires a hardwire kit to connect your camera directly to your vehicle's battery. This will allow the camera to continue recording even when the car is turned off.

3. Install the Hardwire Kit

Installing a hardwire kit is a bit more involved than simply plugging in your camera, but it's not too difficult if you follow the instructions carefully. Most hardwire kits come with detailed instructions, but here's a general overview of the steps:* Locate the fuse box: The fuse box is usually located under the dashboard on the driver's side.
* Find an ignition-controlled fuse: This is a fuse that only has power when the car is turned on.
* Tap into the fuse: Use the included fuse taps to connect the hardwire kit to the ignition-controlled fuse.
* Run the wire to your camera: The hardwire kit will come with a long wire that you'll need to run from the fuse box to your camera.
* Connect the camera: Connect the wire from the hardwire kit to the camera's power input.

4. Configure Parking Mode

Once the hardwire kit is installed, you'll need to configure parking mode on your camera. This can usually be done through the camera's settings menu.

The following settings are typically available:* Motion detection: This setting allows the camera to record only when it detects motion. This can help to save storage space and battery power.
* Impact detection: This setting allows the camera to record when it detects an impact, such as a collision or vandalism.
* Time lapse recording: This setting allows the camera to record a series of still images at a set interval. This can help to conserve storage space and battery power.

5. Test Parking Mode

Once you've configured parking mode, it's important to test it to make sure it's working properly.

To do this, park your car in a safe location and turn off the engine. Then, walk away from the car and wait for a few minutes. The camera should start recording automatically.

To stop recording, simply return to your car and turn on the engine. The camera should stop recording automatically.

6. Troubleshooting

If you're having problems with parking mode, here are a few things to check:* Make sure the hardwire kit is installed correctly.
* Make sure the camera is connected to the hardwire kit.
* Make sure the parking mode settings are configured correctly.
* Check the camera's battery to make sure it's not dead.

Conclusion

Setting up parking mode on your roadcam is a great way to protect your vehicle from hit-and-runs, vandalism, and other incidents. By following the steps in this guide, you can ensure that your camera is recording even when your car is parked and turned off.

2025-02-12

Previous：Toilet vs. Security Camera: A Painting Tutorial

Next：How to Set Up Cloud Monitoring