Hikvision Network Bridge Installation Guide91

A network bridge is a networking device that connects multiple network segments. It allows devices on different networks to communicate with each other. Hikvision network bridges are designed to connect IP cameras and other network devices to a local area network (LAN) or wide area network (WAN). They offer a variety of features, including:
Support for multiple network protocols, including TCP/IP, UDP, and HTTP
High data throughput for fast and reliable video transmission
Easy installation and configuration

This guide will provide you with step-by-step instructions on how to install a Hikvision network bridge.

Prerequisites

Before you begin, you will need the following:
A Hikvision network bridge
A network cable
A computer with an Ethernet port

Installation
Connect the network cable to the LAN port on the network bridge.
Connect the other end of the network cable to an Ethernet port on your computer.
Power on the network bridge.
Open a web browser on your computer and navigate to the IP address of the network bridge. The default IP address is 192.168.1.100.
Enter the default username and password (admin/12345) and click "Login".
Click on the "Configuration" tab.
Click on the "Network" submenu.
Configure the network settings for the network bridge. The following settings are required:
IP Address: The IP address of the network bridge
Subnet Mask: The subnet mask of the network bridge
Default Gateway: The default gateway for the network bridge

Click on the "Apply" button to save the changes.
Click on the "Logout" button to log out of the web interface.

Configuration

Once you have installed the network bridge, you can begin configuring it to connect to your IP cameras and other network devices. To do this, you will need to use the network bridge's web interface.
Open a web browser on your computer and navigate to the IP address of the network bridge.
Enter the username and password that you created during the installation process.
Click on the "Configuration" tab.
Click on the "Channels" submenu.
Click on the "Add" button to add a new channel.
Configure the channel settings. The following settings are required:
Channel Name: The name of the channel
Device Type: The type of device that you are connecting to the channel
IP Address: The IP address of the device
Port: The port number that the device is using

Click on the "Apply" button to save the changes.
Repeat steps 5-7 for each device that you want to connect to the network bridge.

Testing

Once you have configured the network bridge, you can test it to make sure that it is working properly.
Open a web browser on your computer and navigate to the IP address of the network bridge.
Enter the username and password that you created during the installation process.
Click on the "Live View" tab.
Select the channel that you want to view.
The live video from the camera will be displayed in the web browser.

If you are unable to view the live video, check the following:
Make sure that the camera is connected to the network bridge and that the network bridge is connected to the LAN.
Make sure that the camera is configured to use the same IP address and port that you specified in the network bridge's configuration.

Troubleshooting

If you are experiencing problems with your Hikvision network bridge, you can try the following troubleshooting tips:
Make sure that the network bridge is connected to a power source.
Make sure that the network cable is connected to the LAN port on the network bridge and to an Ethernet port on your computer.
Make sure that the IP address of the network bridge is correct.
Make sure that the username and password that you are using to log in to the web interface are correct.
Make sure that the camera is connected to the network bridge and that the network bridge is connected to the LAN.
Make sure that the camera is configured to use the same IP address and port that you specified in the network bridge's configuration.

If you are still experiencing problems, you can contact Hikvision technical support for assistance.

2025-02-05

Previous：The Ultimate Guide to Monitoring Equipment for Beginners

Next：How to Set Up a Laser Monitoring Device