Asus Surveillance Installation Guide386

Introduction

This guide provides step-by-step instructions on how to install and configure Asus surveillance devices. These devices can be used to monitor your home or business, and can help to deter crime and vandalism. They are easy to install and use, and can be customized to meet your specific needs.

What you will need
Asus surveillance device
Ethernet cable
Power adapter
Screwdriver
Drill (optional)

Installation
Choose a location for your surveillance device. The best location will be one that provides a clear view of the area you want to monitor. The device should be mounted at a height of at least 8 feet, and should be out of reach of children and pets.
Install the mounting bracket. The mounting bracket should be screwed into a wall or ceiling using the included screws. If you are mounting the device on a soft surface, such as drywall, you may need to use a drill to create pilot holes.
Attach the surveillance device to the mounting bracket. The device should be snapped into place on the mounting bracket. Make sure that it is securely fastened.
Connect the Ethernet cable to the surveillance device. The Ethernet cable should be connected to the Ethernet port on the back of the device. The other end of the Ethernet cable should be connected to a network switch or router.
Connect the power adapter to the surveillance device. The power adapter should be connected to the power port on the back of the device. The other end of the power adapter should be plugged into an electrical outlet.
Configure the surveillance device. The surveillance device can be configured using the web interface. To access the web interface, open a web browser and enter the IP address of the device into the address bar. The default IP address is 192.168.1.100.

Configuration

The surveillance device can be configured using the web interface. The web interface allows you to change the following settings:
Network settings
Video settings
Audio settings
Motion detection settings
Recording settings

Network settings

The network settings allow you to configure the IP address, subnet mask, and default gateway of the surveillance device. You can also enable or disable DHCP.

Video settings

The video settings allow you to configure the resolution, frame rate, and bitrate of the surveillance device. You can also enable or disable motion detection.

Audio settings

The audio settings allow you to configure the volume and sensitivity of the surveillance device's microphone. You can also enable or disable audio recording.

Motion detection settings

The motion detection settings allow you to configure the sensitivity and duration of the surveillance device's motion detection. You can also select the areas of the image that you want to monitor for motion.

Recording settings

The recording settings allow you to configure the recording schedule and storage location of the surveillance device. You can also choose to record continuously or only when motion is detected.

Troubleshooting

If you are having trouble installing or configuring your surveillance device, you can try the following troubleshooting tips:
Make sure that the surveillance device is properly connected to the network and power.
Make sure that the web interface is accessible by entering the IP address of the device into a web browser.
Reset the surveillance device to its default settings by pressing the reset button on the back of the device.
Contact Asus technical support for assistance.

2025-02-04

Previous：How To Install A Water Leak Detector

Next：Canteen Surveillance System Wiring Tutorial