Hikvision Surveillance System: Step-by-Step DNS Configuration Guide181

Configuring your Hikvision surveillance system's DNS settings is crucial for ensuring seamless performance and remote access. DNS (Domain Name System) translates human-readable domain names (e.g., ) into IP addresses that computers can understand. Follow this step-by-step guide to configure DNS settings on your Hikvision surveillance device.

Prerequisites* Hikvision surveillance device (e.g., NVR, IP camera)
* Internet access
* A valid domain name

Step 1: Determine Network Settings

Begin by gathering the network configuration of your surveillance device. On the device's web interface, navigate to "Network" > "Basic Settings" and record the following information:* IP Address
* Netmask
* Gateway
* Primary DNS Server
* Secondary DNS Server

Step 2: Access Web Interface

To access the web interface of your Hikvision surveillance device:* Open a web browser.
* Enter the IP address of your device in the address bar.
* Log in with your administrator credentials.

Step 3: Locate DNS Settings

Once logged in, navigate to "Network" > "Advanced Settings" > "DNS Settings." This screen will display the current DNS settings.

Step 4: Configure DNS Server

In the "DNS Server" section, enter the IP addresses of your preferred primary and secondary DNS servers. These servers will be responsible for resolving domain names.

Step 5: Configure DDNS Server

Dynamic DNS (DDNS) allows you to assign a static domain name to your device's dynamic IP address. This is useful for remote access.* Check the "Enable DDNS" checkbox.
* Select your DDNS provider from the drop-down list.
* Enter your DDNS account credentials.

Step 6: Configure DNS Type

Select the preferred DNS type from the "DNS Type" drop-down list. Common options include:* Automatic (DHCP): DNS settings are obtained dynamically from the DHCP server.
* Manual: DNS settings are manually entered.
* PPPoE Specific: DNS settings are used specifically for PPPoE-based internet connections.

Step 7: Save and Reboot

Click "Save" to apply the new DNS settings. To ensure the changes take effect, reboot your surveillance device.

Troubleshooting* If you encounter any issues, ensure that your DNS server addresses are valid and correctly entered.
* Check if your internet connection is active.
* Reset the surveillance device to its factory default settings and reconfigure the DNS settings.

Conclusion

By following these steps, you can successfully configure DNS settings on your Hikvision surveillance device. This will allow for seamless remote access and improved overall performance.

2025-02-04

Previous：Wireless Security Camera Setup: A Comprehensive Guide

Next：Remote Network Monitoring for Beginners: A Comprehensive Guide