Dahua Surveillance Router Configuration Guide45

Introduction

Dahua surveillance routers are specifically designed for use with IP surveillance cameras and other security devices. They offer a range of features to enhance the security and reliability of your surveillance system, including advanced traffic management, VPN support, and robust encryption.

Prerequisites

Before you begin, you will need the following:* A Dahua surveillance router
* A computer with an Ethernet connection
* The Dahua surveillance router's IP address and password
* The IP addresses of your surveillance cameras and other devices

Logging In to the Router's Web Interface

1. Open a web browser and type the IP address of the router into the address bar.

2. Enter the router's username and password when prompted.

3. You will now be logged into the router's web interface.

Configuring the Router

Once you are logged into the router's web interface, you can begin configuring it. The following sections will guide you through the most common configuration tasks.

Network Settings

1. Click on the "Network" tab in the left-hand menu.

2. Select the "LAN" interface from the list of interfaces.

3. Enter the IP address and subnet mask for your LAN network.

4. Click on the "Apply" button to save your changes.

DHCP Server

1. Click on the "DHCP Server" tab in the left-hand menu.

2. Select the "Enable DHCP Server" checkbox.

3. Enter the IP address range for your DHCP server.

4. Click on the "Apply" button to save your changes.

Port Forwarding

1. Click on the "Port Forwarding" tab in the left-hand menu.

2. Click on the "Add" button.

3. Enter the IP address of the device you want to forward ports to.

4. Enter the port number you want to forward.

5. Click on the "Apply" button to save your changes.

VPN Settings

1. Click on the "VPN" tab in the left-hand menu.

2. Select the "PPTP" or "L2TP" protocol.

3. Enter the VPN server's IP address or hostname.

4. Enter the VPN server's username and password.

5. Click on the "Apply" button to save your changes.

Troubleshooting

If you are having trouble configuring your Dahua surveillance router, there are a few things you can try:* Check the Ethernet cables connecting your router to your devices.
* Make sure that your router's IP address is correct.
* Reset your router to factory default settings.
* Contact Dahua technical support for assistance.

Conclusion

By following the steps outlined in this guide, you can successfully configure your Dahua surveillance router. This will help you to enhance the security and reliability of your surveillance system.

2025-02-04

Previous：Surveillance Equipment Installation Guide: A Visual Encyclopedia

Next：The Nighthawk Camera‘s Sneaky Smart Set-Up