360 Home Security System Reset Guide119

Introduction

If you're experiencing issues with your 360 Home Security System, resetting it to factory settings may resolve the problem. Resetting the system will erase all user settings, including Wi-Fi passwords, camera configurations, and motion detection settings. Before you reset your system, make sure to note down any important settings that you want to keep.

Resetting the 360 Home Security System

There are two ways to reset the 360 Home Security System:
1. Using the Reset Button

Locate the reset button on the back of the main unit.
Use a paperclip or a small object to press and hold the reset button for about 10 seconds, or until the system starts to beep.
Release the reset button and wait for the system to reboot.


2. Using the 360 Security App

Open the 360 Security app on your smartphone.
Tap on the "Me" tab in the bottom right corner.
Tap on "Settings".
Tap on "System Settings".
Tap on "Reset System".
Confirm that you want to reset the system by tapping on "OK".

Troubleshooting

If you're having trouble resetting your 360 Home Security System, try the following troubleshooting tips:
* Make sure that you're pressing and holding the reset button for long enough (about 10 seconds).
* Try using a different paperclip or small object to press the reset button.
* Make sure that the system is turned on when you're trying to reset it.
* If you're using the 360 Security app to reset the system, make sure that you're logged into the same account that the system is registered to.

Conclusion

Resetting your 360 Home Security System is a simple process that can resolve a variety of issues. If you're experiencing problems with your system, try resetting it to factory settings to see if that solves the problem.

2025-02-03

Previous：How to Set Up Ignition Monitoring

Next：How to Set Up a WG Watch