Mercedes-Benz E-Class Surveillance Installation Guide276

Installing a surveillance system in your Mercedes-Benz E-Class can provide enhanced security and peace of mind. This comprehensive guide will walk you through the step-by-step process of installing a front and rear dash camera, along with a cabin camera for all-around monitoring.

Materials Required:* Front dash camera
* Rear dash camera
* Cabin camera
* Power cable
* Hardwire kit (optional)
* Mounting clips
* Pry tools
* Screwdriver
* Electrical tape

Installation Steps:

Front Dash Camera Installation:

1. Prepare the camera: Remove the front dash cam from its packaging and insert the microSD card.
2. Attach the mounting clip: Position the mounting clip on the windshield, ensuring it is within the legal field of view. Secure it with the adhesive pad.
3. Connect the power cable: Connect the power cable to the dash cam and run it along the A-pillar.
4. Conceal the cable: Tuck the cable under the headliner and side trim using the pry tools.
5. Power the camera: Connect the power cable to the 12V power outlet in the center console.

Rear Dash Camera Installation:

1. Remove the rear seat: Fold down the rear seats and remove the two bolts holding the seat in place. Lift the seat out.
2. Install the camera: Mount the rear dash cam to the rear window using the included adhesive pad.
3. Route the cable: Run the power cable along the headliner and side trim, concealing it as you go.
4. Connect the camera: Connect the power cable to the rear dash cam.

Cabin Camera Installation:

1. Prepare the camera: Remove the cabin cam from its packaging and insert the microSD card.
2. Determine the mounting location: Choose a suitable location on the dashboard or near the rearview mirror for the cabin camera.
3. Mount the camera: Use the adhesive pad to attach the camera to the chosen location.
4. Connect the power cable: Run the power cable from the cabin camera and tap into an existing 12V source, such as the fuse box.

Hardwire Kit Installation (Optional):

1. Install the fuse tap: Connect the fuse tap to the appropriate 12V fuse in the fuse box.
2. Ground the system: Attach the ground wire to a bare metal surface in the vehicle.
3. Connect the camera cables: Connect the power cables from the dash cams and cabin camera to the hardwire kit.
4. Test the system: Verify that all cameras are powered and recording correctly.

Tips and Troubleshooting:* Ensure the camera lenses are clean before installation.
* Use a trim removal tool to avoid damaging interior parts when concealing cables.
* Check the microSD card compatibility with the cameras.
* Test the cameras regularly to ensure they are functioning properly.
* Refer to the manufacturer's instructions for camera-specific installation details.
By following these steps, you can successfully install a surveillance system in your Mercedes-Benz E-Class, providing you with a comprehensive monitoring solution for enhanced security and peace of mind.

2025-02-03

---

Previous：Comprehensive Guide to Legacy Panoramic Surveillance Installation

Next：Legacy Surveillance Installation Tutorial Video