Wired Surveillance Camera Installation Guide with Pictures21

Installing a wired surveillance camera system may seem like a daunting task, but with the right tools and a little know-how, you can get it done in a few hours.

Before you begin, you will need to gather the following materials:- Wired surveillance camera
- Power supply (for the camera)
- Ethernet cable (for connecting the camera to the network)
- Coaxial cable (for connecting the camera to the DVR)
- BNC connectors (for connecting the coaxial cable to the camera and DVR)
- Wall anchors (for mounting the camera)
- Screws (for mounting the camera)

Once you have gathered all of the necessary materials, you can begin the installation process.

1. Choose a location for the camera

The first step is to choose a location for the camera. The ideal location will provide a clear view of the area you want to monitor, and it will be protected from the elements.

Once you have chosen a location, mark the spot where you want to mount the camera.

2. Mount the camera

The next step is to mount the camera. To do this, you will need to drill holes in the wall or ceiling for the wall anchors. Once the wall anchors are in place, you can screw the camera into the wall.

3. Connect the camera to the power supply

The next step is to connect the camera to the power supply. To do this, you will need to use the power supply that came with the camera. Connect one end of the power supply to the camera, and plug the other end into an outlet.

4. Connect the camera to the Ethernet network

The next step is to connect the camera to the Ethernet network. To do this, you will need to use an Ethernet cable. Connect one end of the Ethernet cable to the camera, and the other end to an Ethernet port on your router.

5. Connect the camera to the DVR

The next step is to connect the camera to the DVR. To do this, you will need to use a coaxial cable. Connect one end of the coaxial cable to the camera, and the other end to the DVR.

6. Screw on the BNC connectors

The next step is to screw on the BNC connectors. BNC connectors are used to connect coaxial cables to cameras and DVRs. Screw on the BNC connectors to the ends of the coaxial cable.

7. Power on the camera and DVR

The next step is to power on the camera and DVR. To do this, simply plug the power cords into an outlet.

8. Configure the camera

The next step is to configure the camera. To do this, you will need to use the software that came with the camera. The software will allow you to adjust the camera's settings, such as the image quality, the motion detection settings, and the recording settings.

9. Test the camera

The next step is to test the camera. To do this, simply walk in front of the camera. The camera should start recording, and you should be able to see the video footage on the DVR.

10. Enjoy your new surveillance system

Congratulations! You have now successfully installed your wired surveillance camera system. You can now enjoy the peace of mind that comes with knowing that your home or business is being monitored.

2025-02-02

Previous：How to Set Up a Surveillance Box

Next：How to Install a Car Security Camera: A Step-by-Step Guide with Diagrams