DIY Hemispheric Mount for Surveillance Cameras61

Introduction

Hemispheric surveillance cameras provide a wide-angle view, making them ideal for monitoring large areas. However, purchasing a pre-made hemispheric camera mount can be expensive. This DIY guide will show you how to build your own hemispheric mount using readily available materials at a fraction of the cost.

Materials
¾-inch plywood (1 sheet)
1-inch wood screws
2½-inch wood screws
Compass or protractor
Drill
Screwdriver
Jigsaw or scroll saw
Sandpaper
Paint or stain (optional)

Steps1. Create the Base

Cut a 14-inch diameter circle from the plywood using a jigsaw or scroll saw. This will serve as the base of the mount.2. Shape the Hemisphere

Cut a 20-inch diameter circle from the remaining plywood. Divide the circle into four equal quadrants using a compass or protractor. Remove the two opposite quadrants, leaving a semicircle.3. Attach the Hemisphere to the Base

Place the semicircle on the base circle, aligning the flat edges. Secure it using 1-inch wood screws.4. Drill Holes for Camera Mount

Drill a 3/16-inch hole in the center of the base for the camera mounting screw. Additionally, drill four 1/16-inch holes around the center hole for additional support.5. Attach Camera Mounting Plate

Place the camera mounting plate on the base and align it with the holes. Secure it using 2½-inch wood screws.6. Sand and Finish

Sand all rough edges of the mount to ensure a smooth surface. Optionally, you can paint or stain the mount to match your décor.7. Mount the Camera

Attach the camera to the mounting plate using the provided screws. Adjust the camera angle and tighten the screws to secure it.Tips
* Use a drill press for greater precision when drilling holes.
* Countersink the screw holes slightly to prevent the screws from protruding.
* If desired, you can add a paintbrush to the mount to clean the camera lens remotely.
Conclusion

This DIY hemispheric mount is a cost-effective solution for mounting wide-angle surveillance cameras. It is easy to build and will provide a secure and adjustable platform for your camera. Enjoy the wide-angle coverage of your hemispheric camera without breaking the bank!

2025-02-02

Previous：Billiards Table Monitoring Installation Guide: A Step-by-Step Pictorial

Next：Monitor Joystick Conversion Tutorial Video