360 Smart Camera Reset Connection Guide325

If you're experiencing connectivity issues with your 360 Smart Camera, resetting the connection can help resolve the problem. Resetting the connection will clear any saved Wi-Fi settings and restore the camera to its factory default settings. Follow these steps to reset the connection on your 360 Smart Camera:

Step 1: Power Off the Camera

Locate the power button on the back or bottom of the camera and press it to turn off the device.

Step 2: Locate the Reset Button

The reset button is usually a small, recessed hole located on the back or bottom of the camera. Some models may have a dedicated "Reset" button.

Step 3: Press and Hold the Reset Button

Use a paperclip or a similar pointed object to gently press and hold the reset button for about 10 seconds. The camera will emit a series of beeps and the LED light will begin flashing.

Step 4: Release the Reset Button

Once the camera has finished beeping, release the reset button.

Step 5: Power On the Camera

Press the power button to turn the camera back on.

Step 6: Reconfigure the Camera

Once the camera has rebooted, you will need to reconfigure it by connecting it to your Wi-Fi network. Open the 360 Smart Camera app on your smartphone and follow the prompts to add the camera.

Additional Tips:* Make sure the camera is within range of your Wi-Fi router.
* Ensure that your Wi-Fi network is stable and has a strong signal.
* If you are still having connectivity issues after resetting the connection, try contacting 360 Smart Camera customer support.

Troubleshooting Common Issues:* The camera is not beeping when I press the reset button: The camera may not be powered on properly. Make sure it is plugged into an outlet and that the power button is in the "On" position.
* The LED light is not flashing after I release the reset button: The reset may not have been completed successfully. Try pressing and holding the reset button for a longer period, up to 30 seconds.
* The camera is not connecting to my Wi-Fi network: Ensure that you are entering the correct Wi-Fi password. Also, verify that the camera is close enough to the router and that there are no obstructions blocking the signal.
By following these steps, you should be able to successfully reset the connection on your 360 Smart Camera and resolve any connectivity issues.

2025-02-01

Previous：Store Security Camera Installation Guide: A Comprehensive Tutorial

Next：Monitoring Device Setup: Do Not Disturb