Lehua TV Surveillance Setup: A Comprehensive Guide203

As a professional in the surveillance equipment industry, I've had the opportunity to work with various manufacturers and products, including those from Lehua. In this article, I'll provide you with a comprehensive guide on the setup and configuration of Lehua TV surveillance systems.

Equipment and Preparation

Before you begin the setup process, ensure you have the following equipment:
Lehua TV surveillance cameras
Network video recorder (NVR)
Ethernet cables
Power adapters
Monitor for viewing footage (optional)

Installation of Cameras

1. Mounting the Cameras: Determine the desired locations for your cameras and mount them securely using the provided brackets and screws.

2. Connecting the Cameras: Run Ethernet cables from each camera to the NVR. Connect one end of the cable to the camera and the other end to a PoE port on the NVR.

3. Powering the Cameras: Connect the power adapters to the cameras and plug them into power outlets.

Configuration of the NVR

1. Network Setup: Connect the NVR to your network using an Ethernet cable. Configure the network settings, including IP address, subnet mask, and default gateway, in the NVR's menu.

2. Adding Cameras: In the NVR's menu, add each camera by specifying its IP address, username, and password. The NVR will search for and detect compatible cameras on the network.

3. Camera Settings: Once the cameras are added, adjust their settings, such as resolution, frame rate, motion detection, and privacy masking.

4. Recording Schedules: Set recording schedules to specify when the NVR should record footage from the cameras. You can configure continuous recording, motion-activated recording, or scheduled recording.

Viewing Footage

1. Local Viewing: If you have a monitor connected to the NVR, you can view live footage and playback recordings directly on the monitor.

2. Remote Viewing: To view footage remotely, you need to enable remote access in the NVR's menu. You can then access the footage through a web browser or mobile app.

Troubleshooting Common Issues

1. Camera Not Detected: Verify that the Ethernet cable is properly connected to both the camera and the NVR. Reset the camera by pressing the reset button for 5 seconds.

2. No Video Signal: Check if the camera is powered on and connected to the NVR. Ensure that the resolution settings are compatible with your monitor or viewing device.

3. Recording Not Working: Check the recording schedules and ensure that they are configured correctly. Verify that the NVR has enough storage space to store recordings.

By following these steps, you can successfully set up and configure your Lehua TV surveillance system. It is essential to thoroughly read the user manual and consult with a professional if you encounter any difficulties during the setup process. A properly functioning surveillance system can enhance the security of your home or business and provide you with peace of mind.

2025-01-27

Previous：Monitoring Traffic Cards: A Comprehensive Guide

Next：Fire Alarm Graphical Monitoring Setup