How to Replace the Lamp Module in a Security Camera271

Replacing the lamp module in a security camera is a relatively simple task that can be completed in a few minutes. By following these step-by-step instructions, you can ensure that your camera is operating at peak performance.

Step 1: Gather Your Tools

Before you begin, gather the following tools:* New lamp module
* Phillips screwdriver
* Dustcloth
* Gloves (optional)

Step 2: Power Down the Camera

For safety reasons, it is essential to power down the camera before beginning any work.1. Locate the power cord and unplug it from the outlet.
2. If the camera is battery-powered, remove the batteries.

Step 3: Remove the Camera Housing

The location of the screws that hold the camera housing in place will vary depending on the model of your camera. Typically, they will be located on the bottom or back of the camera.1. Use the Phillips screwdriver to remove the screws.
2. Carefully lift the camera housing off the camera base.

Step 4: Remove the Old Lamp Module

Once the camera housing is removed, you will have access to the lamp module.1. Locate the screws that hold the lamp module in place.
2. Remove the screws.
3. Carefully pull the lamp module out of the camera.

Step 5: Install the New Lamp Module

Align the new lamp module with the socket in the camera.1. Gently push the lamp module into the socket until it is fully seated.
2. Tighten the screws to secure the lamp module.

Step 6: Reassemble the Camera

Align the camera housing with the camera base.1. Carefully lower the camera housing onto the base.
2. Tighten the screws to secure the camera housing.

Step 7: Power Up the Camera

Connect the camera to the power source or insert the batteries.1. Power on the camera.
2. Verify that the lamp module is functioning properly.

Tips* If you are replacing a damaged lamp module, inspect the camera for any other damage.
* Use gloves when handling the lamp module to avoid getting any fingerprints on the glass.
* Clean the dustcloth before using it to avoid scratching the camera lens.
* If you are not comfortable replacing the lamp module yourself, contact a qualified technician.

2025-01-25

Previous：How to Install Surveillance Cameras Outdoors

Next：Comprehensive Guide to Surveillance Camera Installation with Step-by-Step Diagrams