Clay Titan Surveillance User Guide224

Introduction

The Clay Titan Surveillance System is an advanced monitoring solution designed to provide comprehensive security and surveillance capabilities. This guide will provide you with detailed instructions on how to install, configure, and use the Clay Titan system.

Installation

1. Unpack the Clay Titan components and verify that all parts are included.
2. Mount the cameras at desired locations using the included mounting hardware.
3. Connect the cameras to the Network Video Recorder (NVR) using Ethernet cables.
4. Connect the NVR to a power source and monitor.

Configuration

1. Access the NVR web interface by typing its IP address into a web browser.
2. Login using the default username and password (admin).
3. Change the default password for enhanced security.
4. Configure camera settings such as resolution, frame rate, and motion detection.

Live View

1. Open the Live View tab in the NVR interface.
2. Select the cameras you want to view from the dropdown menu.
3. Adjust the display settings to optimize the viewing experience.

Playback

1. Access the Playback tab in the NVR interface.
2. Select the camera and date/time range you want to view.
3. Use the playback controls to navigate through the recording.

Motion Detection

1. Configure motion detection settings for each camera under the Motion Detection tab.
2. Set the sensitivity, detection zone, and recording schedule.
3. Receive instant notifications when motion is detected.

Alerts and Notifications

1. Configure email or SMS alerts under the Alert tab.
2. Specify the conditions that should trigger alerts, such as motion detection or camera tampering.
3. Receive real-time notifications of important events.

Remote Access

1. Set up port forwarding on your router to access the NVR remotely.
2. Install the Clay Titan mobile app on your smartphone or tablet.
3. Connect to the NVR using the app and your login credentials.

Troubleshooting

Camera not connecting:

Check the Ethernet connection between the camera and NVR.
Verify that the camera is powered on.

No video display:

Ensure that the monitor or TV is connected to the NVR.
Check the power connection and cables.

Alerts not working:

Verify that the alert settings are configured correctly.
Check the network connection and port forwarding settings.

Conclusion

The Clay Titan Surveillance System is a powerful and reliable solution for monitoring and protecting your property. By following the instructions in this guide, you can effectively install, configure, and use the system to enhance your security and peace of mind.

2025-01-20

Previous：Monitoring Setup for Remote Disks

Next：How to Install a Security Camera System: A Step-by-Step Tutorial with Images