Monitoring Glasses Setup Guide83

Introduction

Monitoring glasses are a valuable tool for medical professionals, allowing them to view and record patient data in real-time. These glasses can be used for a variety of purposes, including monitoring vital signs, tracking patient movement, and recording surgical procedures. However, it is important to set up monitoring glasses correctly in order to ensure optimal performance and accuracy.

Step 1: Unbox and Assemble

Unbox the monitoring glasses and carefully remove all of the components. The following items should be included:
Monitoring glasses
AC adapter
USB cable
Carrying case

Once all of the components have been removed from the box, assemble the glasses by attaching the headband to the sidearms. The headband should be adjusted to fit comfortably on your head.

Step 2: Charge the Battery

The monitoring glasses come with a rechargeable battery. Before using the glasses, you will need to charge the battery by connecting the AC adapter to the USB cable and then plugging the USB cable into the glasses. The battery will take approximately 2 hours to fully charge.

Step 3: Connect to a Monitor

The monitoring glasses can be connected to a monitor via an HDMI cable. Connect one end of the HDMI cable to the glasses and the other end to the monitor. The glasses will automatically power on and display the data on the monitor.

Step 4: Calibrate the Glasses

The monitoring glasses need to be calibrated before use. To calibrate the glasses, follow these steps:
Put on the glasses and adjust the headband so that the glasses are positioned correctly on your face.
Look at a calibration target. The calibration target should be a black and white square with a crosshair in the center.
Adjust the focus of the glasses until the crosshair is clear.
Press and hold the calibration button on the glasses for 3 seconds.
The glasses will automatically calibrate themselves.

Step 5: Use the Monitoring Glasses

Once the glasses are calibrated, you can use them to view and record patient data. To view data, simply put on the glasses and look at the patient. The data will be displayed on the monitor. To record data, press the record button on the glasses. The data will be recorded to an SD card.

Troubleshooting

If you are having problems with your monitoring glasses, try the following troubleshooting tips:
Make sure that the glasses are properly charged.
Make sure that the glasses are connected to the monitor via an HDMI cable.
Calibrate the glasses.
Restart the glasses.

If you are still having problems, contact the manufacturer of the glasses for support.

Conclusion

Monitoring glasses can be a valuable tool for medical professionals. By following the steps outlined in this guide, you can set up and use your monitoring glasses correctly. If you have any questions or problems, contact the manufacturer of the glasses for support.

2025-01-20

Previous：Ultimate Guide to Manufacturer Settings for Monitoring Equipment

Next：Elephant Monitoring Installation Guide