Mi Security Camera Mount Installation Guide49

The Mi Security Camera Mount is designed to provide a secure and convenient mounting solution for your Mi Security Camera. This guide will provide you with step-by-step instructions on how to install the mount.

What's in the Box?

Before you begin the installation process, please ensure that you have the following items:
Mi Security Camera Mount
Screws
Screwdriver
Wall anchors (optional)

Step-by-Step Installation Instructions

1. Determine the Mounting Location

First, choose the desired location for your Mi Security Camera Mount. It's recommended to mount the camera at a height of around 6-8 feet (1.8-2.4 meters) above the ground, and facing the area you wish to monitor.

2. Mark the Screw Holes

Once you have determined the mounting location, hold the camera mount against the wall and mark the positions of the screw holes using a pencil or pen.

3. Drill Pilot Holes (Optional)

If you are mounting the camera on a hard surface, such as concrete or brick, it's recommended to drill pilot holes before inserting the screws. Use a drill bit that is slightly smaller than the diameter of the screws.

4. Insert Wall Anchors (Optional)

For added stability, especially on drywall or other soft surfaces, you can use wall anchors. Insert the anchors into the pilot holes and tap them flush with the wall using a hammer.

5. Mount the Camera Mount

Align the screw holes on the camera mount with the marked positions or the inserted anchors. Insert the screws into the holes and tighten them securely using a screwdriver.

6. Attach the Camera

Once the camera mount is securely installed, simply attach the Mi Security Camera to the mount. Align the camera with the mount and slide it into place until it locks securely.

Tips for Optimal Performance

To ensure optimal performance of your Mi Security Camera, consider the following tips:
Keep the camera lens clean and unobstructed.
Avoid mounting the camera in direct sunlight or in areas with reflective surfaces.
Ensure that the camera has a clear view of the area you wish to monitor.
Adjust the camera angle to get the desired field of view.

Troubleshooting

If you encounter any issues during the installation or operation of your Mi Security Camera Mount, please refer to the following troubleshooting tips:
If the camera does not attach securely to the mount, check if the screws are tightened properly.
If the mount is not stable on the wall, ensure that you have used wall anchors or have drilled pilot holes for a secure fit.
If you have any other issues, please contact Mi customer support for assistance.

By following these instructions carefully, you can ensure a successful and secure installation of your Mi Security Camera Mount.

2025-01-18

Previous：Toilet Installation Guide: A Step-by-Step Pictorial

Next：Security Monitoring: Essential Considerations for Setting Up an Effective Surveillance System