Turn Off Set Flow Monitoring127

Set flow monitoring is a feature in network devices that allows administrators to monitor the traffic passing through a specific interface. This can be useful for troubleshooting purposes, such as identifying which devices are using the most bandwidth or which applications are generating the most traffic. However, set flow monitoring can also be a performance overhead, so it is important to turn it off when it is not needed.

To turn off set flow monitoring, follow these steps:1. Log into the network device using the SSH or Telnet protocol.
2. Enter the following command:
```
conf t
```
3. Enter the following command to disable set flow monitoring:
```
no set flow monitor
```
4. Exit configuration mode:
```
end
```
5. Save the changes to the configuration file:
```
write
```

Set flow monitoring is now turned off. You can verify this by entering the following command:```
show set flow monitor
```

The output of this command should be empty if set flow monitoring is turned off.

Additional Information

In addition to the steps above, there are a few other things to keep in mind when turning off set flow monitoring:* Set flow monitoring is a global setting, so it will turn off set flow monitoring for all interfaces on the device.
* If you are using set flow monitoring for troubleshooting purposes, be sure to turn it off when you are finished.
* Set flow monitoring can be a performance overhead, so it is important to only use it when necessary.

By following these steps and keeping these additional considerations in mind, you can turn off set flow monitoring and improve the performance of your network devices.

2025-01-17

Previous：Lenovo Computer Monitor Settings: A Comprehensive Guide

Next：Monitoring Location Name Configuration