Xiaomi Security Camera Disassembly Guide274

Xiaomi security cameras are known for their affordable prices and feature-rich functionality. If you're looking to repair or upgrade your Xiaomi security camera, this disassembly guide will provide step-by-step instructions on how to do it safely and effectively.

Tools and Materials

Before you begin, gather the following tools and materials:* Screwdriver set (Phillips and Torx)
* Prying tool (e.g., spudger or plastic card)
* Tweezers
* ESD-safe mat or surface

Step-by-Step Disassembly Instructions

1. Remove the Back Cover

Locate the small screws on the back of the camera. Using a Torx screwdriver, remove the screws. Use a prying tool to carefully separate the back cover from the front housing. Be cautious not to damage the wires connecting the back cover to the camera.

2. Disconnect the CMOS Sensor Cable

Once the back cover is removed, you'll see the CMOS sensor cable connected to the motherboard. Gently disconnect the cable by pulling it straight out from its connector.

3. Remove the Motherboard

Locate the screws securing the motherboard to the housing. Using a Phillips screwdriver, remove these screws. Lift the motherboard carefully out of the housing.

4. Disconnect the Antenna Cable

The antenna cable is connected to the motherboard. Gently pull the connector straight up to disconnect the cable.

5. Remove the Infrared LEDs

The infrared LEDs are attached to the front housing. Use a prying tool to carefully pry out each LED from its socket. Be gentle to avoid damaging the LEDs.

6. Remove the Lens

The lens is attached to the front housing using adhesive. Use a prying tool to carefully pry out the lens assembly from the housing.

7. Remove the Microphone

The microphone is located on the back of the camera. Use a prying tool to gently pry out the microphone from its socket.

8. Reassembly

To reassemble the camera, follow the disassembly steps in reverse order. Ensure all wires and cables are properly connected and all screws are securely tightened.

Tips for Safe Disassembly* Wear an anti-static wrist strap to prevent electrostatic discharge.
* Handle the electronic components with care to avoid damage.
* Use a soft cloth or cotton swabs to clean any dust or debris.
* If you encounter any difficulties during disassembly, refer to the manufacturer's instructions or consult a professional.

2025-01-16

Previous：Smart Monitor Setup: A Comprehensive Guide

Next：Must-Have Guide to Downloading and Installing Surveillance Equipment