Haier Security Camera IP Configuration Guide231

Introduction

Setting up the IP address for your Haier security camera is crucial to ensure proper connectivity and remote access. This comprehensive guide will provide step-by-step instructions on how to configure the IP address of your Haier security camera both manually and using the EZVIZ app.Manual IP Configuration

1. Power On the Camera: Connect the camera to a power source and wait for it to boot up.
2. Connect to Wi-Fi: Use an Ethernet cable to connect the camera to your router. Alternatively, if your camera supports Wi-Fi, connect it to your home network.
3. Access Camera Web UI: Open a web browser on your computer or laptop. Enter the camera's default IP address, which is typically 192.168.1.108, into the address bar.
4. Log In: Use the camera's default username and password, which are usually "admin."
5. Configure IP Settings: Navigate to the "Network" or "IP Configuration" tab in the web user interface. Set the "IP Address" field to your preferred IP address from your network range (e.g., 192.168.1.50).
6. Set Subnet Mask and Gateway: Input the appropriate subnet mask (e.g., 255.255.255.0) and gateway address (e.g., 192.168.1.1).
7. Save Changes: Click the "Save" or "Apply" button to save the IP configuration.
IP Configuration Using EZVIZ App

1. Download EZVIZ App: Install the EZVIZ app on your smartphone or tablet from the App Store (iOS) or Google Play (Android).
2. Create Account: Register for an EZVIZ account if you don't have one.
3. Add Camera: Power on the camera and connect it to your Wi-Fi network. Open the EZVIZ app and tap on the "+" icon to add a new device.
4. Scan QR Code: Scan the QR code located on the bottom of the camera. This will automatically detect and add the camera to your EZVIZ account.
5. Configure Network: Once the camera is added, navigate to the camera's settings in the EZVIZ app. Tap on "Network Settings" and select "DHCP Mode."
6. Set IP Address (Optional): If you prefer to assign a specific IP address, tap on "Manual Mode" and enter the desired IP address from your network range.
7. Save Changes: Tap on the "Save" button to save the network configuration.
Troubleshooting

If you encounter any issues while configuring the IP address of your Haier security camera, try the following troubleshooting steps:* Ensure that the camera is powered on and connected to your network.
* Verify that you have entered the correct IP address, subnet mask, and gateway address.
* Reset the camera to its default settings by pressing and holding the reset button on the bottom of the camera for 10 seconds.
* Contact Haier support for further assistance.
Conclusion

By following these detailed instructions, you can successfully configure the IP address of your Haier security camera, ensuring seamless connectivity and remote access. Whether you prefer manual IP configuration or the convenience of the EZVIZ app, this guide provides comprehensive guidance for all users.

2025-01-15

Previous：How to Set Up Xiaomi Home Security Camera Wi-Fi

Next：Security Surveillance System Installation Guide

New