Haier Video Surveillance Installation Guide128

Introduction

This guide will provide you with step-by-step instructions on how to install your Haier video surveillance system. This system will allow you to monitor your home or business from anywhere in the world with your smartphone, tablet, or computer. Before you begin, please gather the following tools and materials:
Drill
Screwdriver
Wrench
Ethernet cables
Power cables
Mounting hardware

Step 1: Install the NVR

The NVR (Network Video Recorder) is the central hub of your surveillance system. It will store your video footage and allow you to view it remotely. To install the NVR, follow these steps:
Choose a location for the NVR. It should be in a well-ventilated area with access to power and Ethernet.
Mount the NVR to the wall or rack using the provided mounting hardware.
Connect the NVR to a power outlet using the provided power cable.
Connect the NVR to your router using an Ethernet cable.
Power on the NVR and wait for it to boot up.

Step 2: Install the Cameras

The cameras are the eyes of your surveillance system. They will capture the video footage that is stored on the NVR. To install the cameras, follow these steps:
Choose a location for each camera. The cameras should be placed in areas where they can capture the most important footage.
Mount the cameras to the wall or ceiling using the provided mounting hardware.
Connect the cameras to the NVR using Ethernet cables.
Power on the cameras using the provided power cables.

Step 3: Configure the NVR

Once the cameras are installed, you need to configure the NVR. To do this, follow these steps:
Open a web browser and enter the IP address of the NVR.
Enter the username and password for the NVR.
Click on the "Configuration" tab.
Configure the NVR settings according to your needs.
Click on the "Save" button.

Step 4: View the Footage

Once the NVR is configured, you can view the footage from your cameras. To do this, follow these steps:
Open a web browser and enter the IP address of the NVR.
Enter the username and password for the NVR.
Click on the "Live View" tab.
Select the cameras that you want to view.

Troubleshooting

If you are having problems installing or using your Haier video surveillance system, please refer to the following troubleshooting tips:
Make sure that all of the cables are securely connected.
Restart the NVR and the cameras.
Check the NVR settings to make sure that they are correct.
Contact Haier customer support for assistance.

Conclusion

By following these steps, you can easily install and use your Haier video surveillance system. This system will provide you with peace of mind, knowing that you can monitor your home or business from anywhere in the world.

2025-01-15

Previous：Monitoring Engineering Setup Requirements

Next：Monitoring System Alarm Setups