Hard Drive Surveillance NVR Installation Guide252

A surveillance system with a hard drive network video recorder (NVR) can provide a reliable and cost-effective way to monitor your property or business. To get started, follow these steps to install your hard drive NVR:

Mounting the NVR

1. Choose a suitable location for the NVR that is well-ventilated and protected from moisture and dust.
2. Mount the NVR on a wall or in a rack using the provided mounting brackets.
3. Ensure the NVR is level and securely fastened.

Connecting the Cameras

1. Connect each camera to the NVR using Ethernet cables.
2. Plug the other end of each cable into a PoE port on the NVR.
3. Use the NVR's web interface to add each camera to the system.

Connecting Other Devices

If you want to connect other devices to the NVR, such as a monitor, keyboard, or mouse, follow these steps:
1. Connect the monitor to the NVR's HDMI port.
2. Connect the keyboard and mouse to the NVR's USB ports.

Configuring the NVR

1. Access the NVR's web interface using a web browser.
2. Enter the default username and password (usually "admin" and "12345").
3. Change the default password for increased security.
4. Set the date and time using the NTP settings.
5. Configure the recording settings, such as recording method, resolution, and frame rate.

Installing the Hard Drive

1. Open the NVR's case by removing the screws on the back.
2. Locate the hard drive bay and insert the hard drive.
3. Tighten the screws to secure the hard drive in place.
4. Close the NVR's case.

Storing and Managing Recordings

1. The NVR will automatically start recording video footage once it is configured.
2. Recordings are stored on the installed hard drive.
3. You can access and manage recordings through the NVR's web interface or dedicated software.

Troubleshooting

If you encounter any problems during the installation process, try the following:
1. Check all cable connections to ensure they are secure.
2. Make sure the NVR and cameras are powered on and functioning properly.
3. Reset the NVR to its default settings.
4. Contact technical support for assistance.

Conclusion

By following these steps, you can install a hard drive NVR and begin monitoring your property or business. Remember to configure the system according to your specific needs and follow best practices for maintaining the system's health and performance.

2025-01-13

Previous：Outdoor Video Surveillance System Installation Guide

Next：How to Configure Your Monitoring Tour Screen