CamHi Monitoring Software Installation Guide166

Introduction

CamHi Monitoring Software is a professional surveillance software designed to provide remote monitoring and control of IP cameras. It offers a user-friendly interface and supports various camera models from multiple manufacturers. This guide will provide step-by-step instructions on how to install and set up the CamHi Monitoring Software.

System Requirements

Before installing CamHi Monitoring Software, ensure your system meets the following requirements:
Operating System: Windows 7 or higher, macOS 10.10 or higher
Processor: Intel Core i5 or equivalent
Memory: 4GB RAM or more
Storage: 1GB of free hard disk space
Internet connection: For remote access

Installation

1. Download the CamHi Monitoring Software from the official website or a reliable source.
2. Run the downloaded installer file (.exe or .pkg).
3. Follow the on-screen instructions to complete the installation process.
4. Once installed, launch the CamHi Monitoring Software from the desktop shortcut or Start menu.

Camera Setup

1. Connect the IP camera to your network.
2. Open the CamHi Monitoring Software.
3. Click on the "Add Camera" button.
4. Select the camera model from the list or enter the device ID manually.
5. Provide the camera's IP address, port, username, and password.
6. Click "OK" to save the camera configuration.

Live View

Once the camera is added, click on the "Live View" tab. You will see a real-time video feed from the camera. Adjust the camera settings such as brightness, contrast, and resolution as needed.

Remote Access

To access the camera remotely, you need to enable remote access in the camera settings. Then, in the CamHi Monitoring Software, go to the "Remote" tab and follow these steps:
Click on "Enable Remote Access."
Enter a remote password.
Click "OK" to save the settings.

Playback

To playback recorded videos, go to the "Playback" tab. Select the camera and the date range you want to view. The software will display the available recordings. Click on the desired recording to start playback.

Motion Detection

CamHi Monitoring Software supports motion detection. To enable it, go to the "Motion Detection" tab. Select the camera and configure the motion detection settings, such as sensitivity and detection area. When motion is detected, the software will send an alert and start recording.

Additional Features

The CamHi Monitoring Software also offers additional features, including:
Scheduled Recording
Digital Zoom
Two-way Audio (for cameras with built-in microphones)
Pan/Tilt/Zoom Control (for PTZ cameras)

Troubleshooting

If you encounter any issues while using the CamHi Monitoring Software, refer to these troubleshooting tips:
Ensure the camera and software are connected to the same network.
Check the camera's IP address, port, username, and password are correct.
Restart the camera and software.
Uninstall and reinstall the software.
Contact the camera manufacturer or the software developer for additional support.

2024-10-27

Previous：Automotive Telematics Video Tutorial

Next：Arm Surveillance Video Tutorials Download