DailyRoads Parking Mode Setup Guide23

DailyRoads dash cams, renowned for their reliability and advanced features, come equipped with a comprehensive Parking Mode that safeguards your vehicle when parked and unattended. This guide will provide step-by-step instructions on how to set up and configure DailyRoads Parking Mode to ensure maximum protection for your vehicle.

Step 1: Installing the Dash Cam

Before setting up Parking Mode, it's crucial to install the DailyRoads dash cam securely in your vehicle. Refer to the user manual for detailed installation instructions. Ensure the dash cam has a clear view of the surroundings, including any potential blind spots.

Step 2: Enabling Parking Mode

Once the dash cam is installed, access the camera's menu settings. Navigate to the "Parking Mode" or "Motion Detection" section and enable the feature. This will allow the dash cam to automatically enter Parking Mode when the ignition is turned off.

Step 3: Configuring Parking Mode Settings

After enabling Parking Mode, adjust the following settings to customize its behavior:
Motion Detection Sensitivity: Set the sensitivity level to detect motion around the vehicle. Higher sensitivity will trigger recording for even minor movements, while lower sensitivity reduces false detections.
Recording Duration: Determine how long each recording should last when motion is detected. Shorter durations conserve storage space, while longer durations provide more footage.
G-Sensor Sensitivity: Adjust the accelerometer sensitivity to trigger recording when a potential impact is detected. Higher sensitivity increases impact detection, while lower sensitivity may miss some collisions.
Power Management: Configure the dash cam's power management settings to optimize battery consumption. Choose between "Auto" for automatic battery protection, "Always On" for continuous recording, or "Low Power" for extended parking time.

Step 4: Hardwiring to Continuous Power

For uninterrupted Parking Mode operation, consider hardwiring the dash cam to your vehicle's battery. This ensures a constant power supply, allowing the dash cam to remain active even when the ignition is off.

Step 5: Verifying Parking Mode

Once Parking Mode is configured, turn off your vehicle's ignition to activate it. Walk around the car to trigger motion detection and verify that the dash cam is recording. If not, adjust the sensitivity settings or ensure there are no obstructions blocking the camera's view.

Step 6: Monitoring and Reviewing Footage

To review footage captured in Parking Mode, connect the dash cam to your computer or use a mobile app (if available). The footage will be stored on the dash cam's microSD card. You can sort and filter the recordings based on date, time, or event type.

Tips for Optimal Parking Mode

To enhance the effectiveness of DailyRoads Parking Mode, consider the following tips:
Park your vehicle in a well-lit and secure area.
Use a high-quality microSD card with sufficient storage capacity.
Keep your dash cam's firmware updated for optimal performance.
Check the dash cam regularly for any damage or loose connections.

Conclusion

Setting up DailyRoads Parking Mode is a straightforward process that provides comprehensive protection for your vehicle while parked. By following these steps and customizing the settings, you can ensure that your dash cam reliably captures potential incidents, safeguarding your vehicle and providing valuable evidence if necessary.

2025-01-12

Previous：Wireless Security Camera Host Modification Tutorial

Next：How to Set Up a Monitoring AP