Old-School Security Camera Installation Tutorial261

Introduction

In the world of home security, there are two main types of surveillance cameras: old-school wired cameras and modern wireless cameras. While wireless cameras are more convenient and easier to install, wired cameras still offer several advantages, such as better image quality, reliability, and security. If you're looking to install a wired security camera system, this guide will walk you through the entire process, from choosing the right equipment to mounting the cameras and running the wires.

Choosing the Right Equipment

The first step in installing a wired security camera system is to choose the right equipment. Here are a few things to consider:
Camera type: There are two main types of wired security cameras: analog cameras and IP cameras. Analog cameras are the older type of camera, and they use a coaxial cable to transmit video to a DVR (digital video recorder). IP cameras are newer and use an Ethernet cable to transmit video to an NVR (network video recorder). IP cameras are generally more expensive than analog cameras, but they offer several advantages, such as better image quality, remote access, and more advanced features.
Resolution: The resolution of a security camera determines the amount of detail that it can capture. The higher the resolution, the better the image quality. For most home security applications, a resolution of 1080p is sufficient. However, if you need to capture fine details, you may want to consider a camera with a higher resolution.
Field of view: The field of view of a security camera determines how wide of an area it can cover. A wider field of view is better for covering larger areas, but it can also result in a lower image quality. For most home security applications, a field of view of 90-120 degrees is sufficient.
Night vision: Night vision is an important feature for security cameras that will be used to monitor areas at night. Night vision cameras use infrared light to illuminate the scene, allowing them to capture images in low-light conditions. The range of night vision cameras varies, so be sure to choose a camera that has a range that is suitable for your needs.

Installing the Cameras

Once you have chosen the right equipment, it's time to install the cameras. Here are the steps involved:
Choose the mounting location: The first step is to choose the mounting location for the camera. The camera should be placed in a location where it can provide a clear view of the area you want to monitor. It's also important to choose a location that is protected from the elements and vandalism.
Mount the camera: Once you have chosen the mounting location, you need to mount the camera. Most cameras come with a mounting bracket that can be used to mount the camera to a wall or ceiling. Be sure to follow the manufacturer's instructions for mounting the camera.
Connect the camera to the DVR/NVR: Once the camera is mounted, you need to connect it to the DVR/NVR. Most cameras use a coaxial cable or an Ethernet cable to connect to the DVR/NVR. Be sure to follow the manufacturer's instructions for connecting the camera.
Adjust the camera angle: Once the camera is connected, you need to adjust the camera angle. The camera angle should be adjusted so that the camera is pointing at the area you want to monitor. You can use the camera's joystick or software to adjust the camera angle.
Test the camera: Once the camera is installed, you need to test the camera to make sure it is working properly. You can do this by viewing the live feed from the camera on the DVR/NVR. You should also test the night vision feature to make sure it is working properly.

Running the Wires

Once the cameras are installed, you need to run the wires to the DVR/NVR. Here are the steps involved:
Plan the wire route: The first step is to plan the wire route. You need to determine the best way to run the wires from the cameras to the DVR/NVR. You should try to avoid running the wires through areas where they could be damaged or vandalized.
Run the wires: Once you have planned the wire route, you need to run the wires. You can use a variety of methods to run the wires, such as using cable channels, conduit, or burying the wires underground. Be sure to follow the manufacturer's instructions for running the wires.
Connect the wires to the DVR/NVR: Once the wires are run, you need to connect them to the DVR/NVR. Most DVRs/NVRs have a set of terminals where you can connect the wires. Be sure to follow the manufacturer's instructions for connecting the wires.
Test the system: Once the wires are connected, you need to test the system to make sure it is working properly. You can do this by viewing the live feed from the cameras on the DVR/NVR. You should also test the night vision feature to make sure it is working properly.

Conclusion

Installing a wired security camera system can be a challenging task, but it is a rewarding one. By following the steps in this guide, you can install a security camera system that will help you protect your home and family.

2025-01-11

Previous：Who Sets Up Monitoring Equipment?

Next：How to Set Up Unicom Monitoring