How to Configure Network Settings for Dahua Surveillance Mainframe398

In order to ensure the smooth and efficient operation of surveillance systems, it is crucial to properly configure the network settings of Dahua surveillance mainframe. Here's a comprehensive guide to help you with this process:

1. Physical Connections:

• Ensure that the mainframe is connected to the network via an Ethernet cable.

• Verify that the cable is properly plugged into both the mainframe and the network router or switch.

2. Accessing the Mainframe's Network Settings:

• Open a web browser and enter the mainframe's IP address into the address bar.

• Enter the default username and password (usually "admin" and "password").

• Navigate to the "Network" or "Ethernet" section in the mainframe's menu.

3. Configuring IP Settings:

• Choose the appropriate network configuration mode (DHCP or Static IP).

• If using DHCP, it will automatically obtain the necessary IP address and network configuration from a DHCP server on the network.

• If using Static IP, manually set the IP address, subnet mask, and default gateway.

4. Configuring TCP/IP Settings:

• Set the Transmission Control Protocol (TCP) port, which defaults to 37777.

• Configure the User Datagram Protocol (UDP) port, which defaults to 37778.

• Leave the HTTP port as is unless you have a specific need to change it.

5. Configuring DNS Settings:

• If necessary, set the primary and secondary Domain Name System (DNS) server addresses.

• These addresses specify the servers to contact for translating domain names into IP addresses.

6. Configuring NTP Settings:

• Configure the Network Time Protocol (NTP) server address to ensure accurate time synchronization.

• This is important for events and log management.

7. Saving and Applying Changes:

• After configuring all the necessary network settings, click "Apply" or "Save" to save the changes.

• The mainframe will automatically restart to apply the new settings.

Troubleshooting Tips:

• If you cannot access the mainframe's network settings, ensure that the IP address is correct.

• Check the network cable connections and verify that the network is functioning properly.

• If you experience connectivity issues, try resetting the mainframe to its factory settings.

By following these steps, you can ensure that your Dahua surveillance mainframe is properly configured for network connectivity. This will enable you to remotely access the device, manage recordings, and monitor live feeds efficiently.

2024-10-20

Previous：Resolve Network Connectivity Issues for Monitoring Devices

Next：How to Set Up Surveillance Playback Channels