How to Change the Monitor Screen for a Surveillance System288

Surveillance systems play a crucial role in protecting your property and ensuring the safety of your loved ones. A key component of a surveillance system is the monitor, which allows you to view footage captured by the cameras. If your surveillance monitor needs to be replaced, it's important to know how to do it correctly.

In this article, we will provide step-by-step instructions on how to change the monitor screen for a surveillance system. We will cover both analog and IP surveillance systems.

Analog Surveillance Systems

Analog surveillance systems use coaxial cables to transmit video signals from the cameras to the monitor. To change the monitor screen for an analog surveillance system, you will need the following tools:
Phillips head screwdriver
New monitor
Coaxial cable

Step 1: Unplug the old monitor.

Disconnect the coaxial cable from the back of the old monitor. Then, unplug the power cord from the electrical outlet.

Step 2: Remove the old monitor from its mount.

Most monitors are mounted to a wall or ceiling using screws. Use a Phillips head screwdriver to remove the screws and carefully lift the old monitor off the mount.

Step 3: Connect the new monitor to the coaxial cable.

Screw the coaxial cable into the back of the new monitor. Make sure the cable is securely tightened.

Step 4: Mount the new monitor.

Place the new monitor on the mount and align the screw holes. Insert the screws and tighten them securely.

Step 5: Plug in the new monitor.

Connect the power cord to the electrical outlet and turn on the monitor. The monitor should automatically display the video feed from the cameras.

IP Surveillance Systems

IP surveillance systems use Ethernet cables to transmit video signals from the cameras to the monitor. To change the monitor screen for an IP surveillance system, you will need the following tools:
Phillips head screwdriver
New monitor
Ethernet cable

Step 1: Unplug the old monitor.

Disconnect the Ethernet cable from the back of the old monitor. Then, unplug the power cord from the electrical outlet.

Step 2: Remove the old monitor from its mount.

Most monitors are mounted to a wall or ceiling using screws. Use a Phillips head screwdriver to remove the screws and carefully lift the old monitor off the mount.

Step 3: Connect the new monitor to the Ethernet cable.

Plug the Ethernet cable into the back of the new monitor. Make sure the cable is securely plugged in.

Step 4: Mount the new monitor.

Place the new monitor on the mount and align the screw holes. Insert the screws and tighten them securely.

Step 5: Plug in the new monitor.

Connect the power cord to the electrical outlet and turn on the monitor. The monitor should automatically display the video feed from

2024-10-26

Previous：Hotel Surveillance System Installation Guide

Next：Nine Eagles Installation Tutorial with Images