Fleetsmart Fleet Telematics Installation Guide295

Introduction

Thank you for choosing Fleetsmart for your fleet telematics needs. This installation guide will walk you through the process of installing the Fleetsmart device on your vehicles.

Prerequisites

Before you begin, you will need the following:
Fleetsmart device
12-volt power source
Ground wire
GPS antenna
Zip ties or other mounting hardware
Wrench or screwdriver

Step 1: Identify the Installation Location

The Fleetsmart device can be installed in various locations on the vehicle. The ideal location is one that is:
Within reach of the power source
Not exposed to the elements
Not in the way of the driver's view

Step 2: Connect the Power Wires

Locate the power wires on the Fleetsmart device. The red wire is positive (+), and the black wire is negative (-). Connect the red wire to the positive terminal of the 12-volt power source and the black wire to the negative terminal.

Step 3: Connect the Ground Wire

Connect the ground wire to a metal surface on the vehicle. This will provide a path for the device to ground itself.

Step 4: Connect the GPS Antenna

Connect the GPS antenna to the designated port on the Fleetsmart device. The antenna should be placed in a location with a clear view of the sky.

Step 5: Mount the Device

Using zip ties or other mounting hardware, secure the Fleetsmart device in the desired location. Ensure that the device is securely mounted and will not move.

Step 6: Power on the Device

Once the device is installed, power it on by turning the ignition key to the "on" position. The device will take a few minutes to initialize and acquire a GPS signal.

Step 7: Verify Installation

To verify the installation, log in to the Fleetsmart portal and check the status of the device. The device should show as "online" and should be sending data to the portal.

Troubleshooting

If you encounter any problems during installation, please refer to the following troubleshooting tips:
Ensure that all connections are secure.
Check the power source to ensure that it is providing 12 volts.
Check the GPS antenna connection and ensure that the antenna is placed in a location with a clear view of the sky.
If the device is not powering on, check the fuse.

If you have any further questions or need assistance with the installation, please do not hesitate to contact Fleetsmart support at support@.

2024-12-29

Previous：Ultimate Guide to Configuring Surveillance Equipment

Next：Fire Detection System Monitoring

New