Tenway Parking Monitoring System: Installation Guide33

Introduction

Thank you for choosing Tenway's Parking Monitoring System. This guide will provide you with step-by-step instructions on how to install and configure the system. Please read and follow the instructions carefully to ensure a successful installation. If you have any questions or encounter any difficulties, please contact our technical support team for assistance.

System Overview

Tenway's Parking Monitoring System consists of the following components:* Parking sensor module
Control unit
Display unit
Buzzer
Wiring harness
Installation kit

Tools and Materials Required

In addition to the system components, you will need the following tools and materials for installation:* 10mm socket wrench
Phillips head screwdriver
Electrical tape
Wire strippers/cutters
Drill (for mounting the parking sensor module)
Measuring tape or ruler
Pen or pencil

Installation Steps

1. Preparation

Before starting the installation, read the safety precautions carefully and ensure that the vehicle is parked in a safe and stable location. Disconnect the negative battery terminal to prevent any electrical shorts or damage to the system.

2. Mounting the Parking Sensor Module

The parking sensor module should be mounted in the rear bumper of the vehicle, facing downward. Choose a location that is clear of obstructions and where the module will not interfere with other components. Use the provided mounting bracket and screws to secure the module to the bumper.

3. Installing the Control Unit

The control unit is the brain of the system and should be mounted in a convenient location inside the vehicle. Choose a location where it is accessible for maintenance and where it will not interfere with other components. Use the provided mounting screws to secure the control unit to the vehicle.

4. Connecting the Wiring Harness

Connect the wiring harness to the parking sensor module, control unit, display unit, and buzzer. Use the provided color-coded labels to ensure that the connections are made correctly. Secure the connections with electrical tape to prevent any loose connections.

5. Mounting the Display Unit

The display unit is used to display the parking information to the driver. Choose a location for the display unit that is easy to see and does not interfere with the driver's field of view. Use the provided mounting bracket and screws to secure the display unit to the vehicle.

6. Mounting the Buzzer

The buzzer is used to alert the driver to obstacles when parking. Choose a location for the buzzer that is audible to the driver but does not interfere with other sounds in the vehicle. Use the provided mounting bracket and screws to secure the buzzer to the vehicle.

7. Connecting the Battery

Once the system has been installed, reconnect the negative battery terminal. Turn on the ignition and verify that the system is functioning properly. The display unit should power on and display the parking information. The buzzer should sound when obstacles are detected.

8. Calibration

For optimal performance, the system should be calibrated after installation. Follow the instructions in the user manual to calibrate the system. This will ensure that the system accurately detects obstacles and provides reliable parking information.

Safety Precautions

Please adhere to the following safety precautions during installation:* Wear safety glasses and gloves to protect yourself from potential hazards.
Ensure that the vehicle is parked in a safe and stable location.
Disconnect the negative battery terminal before starting any electrical work.
Follow the installation instructions carefully to prevent any damage to the system or the vehicle.
Do not attempt to repair or modify the system on your own. If you encounter any problems, contact our technical support team.

2024-12-25

Previous：Monitoring Device Repair Guide: Step-by-Step Walkthrough with Images

Next：Monitoring Configuration Adjustment 85