360 Monitoring Network Setup Guide352

360 Monitoring is a comprehensive video surveillance solution that offers a wide range of features and capabilities. It is designed to meet the needs of small businesses, large enterprises, and everything in between. With 360 Monitoring, you can monitor your premises remotely, receive real-time alerts, and record footage for later review. In this guide, we will walk you through the steps on how to set up your 360 Monitoring network.

Before You Start

Before you begin, you will need the following:* A 360 Monitoring camera
* A compatible NVR (Network Video Recorder)
* An Ethernet cable
* A power adapter for the camera

Step 1: Connect the Camera to the NVR

Using the Ethernet cable, connect the camera to the NVR. The camera will automatically receive its IP address from the NVR.

Step 2: Power on the Camera

Connect the power adapter to the camera and plug it into a power outlet. The camera will now power on and begin sending video footage to the NVR.

Step 3: Access the NVR

To access the NVR, open a web browser and enter the NVR's IP address in the address bar. You will be prompted to enter a username and password. The default username is "admin" and the default password is "password".

Step 4: Configure the NVR

Once you are logged into the NVR, you will need to configure it. This includes setting the date and time, creating users, and configuring the recording settings.

Step 5: Add the Camera to the NVR

To add the camera to the NVR, click on the "Cameras" tab and then click on the "Add" button. Enter the camera's IP address and click on the "Add" button. The camera will now be added to the NVR.

Step 6: Test the Camera

To test the camera, click on the "Live View" tab. You should now see live video footage from the camera. If you do not see any video footage, check the camera's connections and make sure that the NVR is configured correctly.

Step 7: Record Footage

To record footage, click on the "Recording" tab. You can choose to record footage continuously or only when motion is detected. You can also set the recording quality and the length of time that the footage will be stored.

Step 8: Receive Alerts

360 Monitoring can send you real-time alerts when motion is detected or when the camera is disconnected. To configure alerts, click on the "Alerts" tab. You can choose to receive alerts via email, SMS, or push notification.

Step 9: Remote Access

You can access your 360 Monitoring system remotely from anywhere in the world. To do this, you will need to set up a DDNS (Dynamic Domain Name System) service. A DDNS service will provide you with a static IP address that you can use to access your system remotely.

Troubleshooting

If you are having trouble setting up your 360 Monitoring network, here are some troubleshooting tips:* Make sure that the camera and the NVR are connected to the same network.
* Check the camera's connections and make sure that they are secure.
* Restart the camera and the NVR.
* Reset the camera to its default settings.
* Contact 360 Monitoring technical support.

2024-12-23

Previous：Automated Focus Adjustment for Surveillance Cameras

Next：DAHUA Surveillance Network Cable Connection Guide