Huawei Surveillance Kit Installation Guide9

Introduction

This guide provides step-by-step instructions on how to install and configure a Huawei surveillance kit. The kit includes a network video recorder (NVR), cameras, and accessories such as cables and mounts. Before installing the kit, please ensure that you have all the necessary components and tools.

Step 1: Unpack and Inspect the Kit

Carefully unpack the kit and inspect the contents for any damage. If any components are damaged, please contact Huawei customer service immediately.

Step 2: Mount the Cameras

Determine the optimal locations for the cameras and mount them securely using the provided brackets and screws. Ensure that the cameras are positioned to cover the desired surveillance areas.

Step 3: Connect the Cameras to the NVR

Connect the cameras to the NVR using coaxial cables or Ethernet cables (depending on the type of cameras used). If using coaxial cables, use BNC connectors. If using Ethernet cables, make sure they are Cat5e or higher.

Step 4: Connect the NVR to the Network

Connect the NVR to a router or switch using an Ethernet cable. Ensure that the NVR has access to the Internet for remote access and firmware updates.

Step 5: Configure the NVR

Power on the NVR and connect a monitor and keyboard to it. Follow the on-screen instructions to configure the NVR's basic settings, including language, time zone, and network settings.

Step 6: Add the Cameras

Once the NVR is configured, go to the camera management menu and add the cameras by entering their IP addresses or scanning the QR codes on the cameras.

Step 7: Configure Camera Settings

Configure the camera settings to optimize image quality and performance. These settings may include resolution, frame rate, white balance, and exposure.

Step 8: Set Up Motion Detection

Enable motion detection on the cameras to trigger recording or notifications when movement is detected. Adjust the sensitivity and detection areas to minimize false alarms.

Step 9: Set Up Remote Access

Configure remote access on the NVR to allow you to view the cameras and manage the system remotely. This can be done through the Huawei SmartPSS software or a mobile app.

Step 10: Troubleshooting

If you encounter any issues during installation or configuration, refer to the troubleshooting section of the user manual or contact Huawei customer service for assistance.

Conclusion

Congratulations! You have successfully installed and configured your Huawei surveillance kit. The system is now operational and will provide you with enhanced security and surveillance capabilities. Regular maintenance and firmware updates are recommended to ensure optimal performance and security.

2024-10-25

Previous：Where to Place Video Surveillance Cameras

Next：ZIBO Surveillance Installation Guide