Oil Tank Monitoring Installation Tutorial Video171

Introduction

Are you tired of running out of oil and having to make emergency deliveries? Do you want to know how much oil you have left without having to go outside and check your tank? If so, then you need to install an oil tank monitor.

Here is a step-by-step video tutorial on how to install an oil tank monitor:

Materials You Will Need:
Oil Tank Monitor Kit
Drill
Drill bit (size of the hole in the sensor)
Waterproof sealant
Screwdriver
Zip ties or wire

Step-by-Step Instructions:1.

Choose the location for the sensor. The sensor should be placed on the side of the tank, about one-third of the way from the bottom. Make sure to choose a location that is not obstructed by any other objects.2.

Drill a hole in the tank at the chosen location. The hole should be the same size as the hole in the sensor.3.

Insert the sensor into the hole. Make sure that the sensor is facing the correct direction, with the arrow pointing towards the top of the tank.4.

Apply waterproof sealant around the edge of the sensor to prevent leaks.5.

Connect the sensor to the transmitter. The transmitter will be mounted on the outside of the tank.6.

Mount the transmitter on the outside of the tank. Make sure that the transmitter is located in a visible location where it can easily be seen.7.

Connect the transmitter to the power supply. The power supply will be either a battery or a wall outlet.8.

Connect the transmitter to the receiver. The receiver will be located inside your home.9.

Power on the receiver. The receiver will display the oil level in the tank.

Troubleshooting:
If the sensor is not working, check the following:

The sensor is properly installed.
The sensor is facing the correct direction.
The sensor is not obstructed by any other objects.

If the transmitter is not working, check the following:

The transmitter is properly connected to the sensor.
The transmitter is powered on.
The transmitter is not obstructed by any other objects.

If the receiver is not working, check the following:

The receiver is properly connected to the transmitter.
The receiver is powered on.
The receiver is not obstructed by any other objects.

Conclusion

Installing an oil tank monitor is a simple and inexpensive way to keep track of your oil level. By following these simple steps, you can ensure that you always have enough oil to keep your home warm and comfortable.

2024-10-24

Previous：Xiaomi Mi Smart Plug Installation Guide

Next：Monitoring Frame Rates: The Key to Optimal Video Surveillance Performance