Aurora Box Installation Guide for Surveillance82

IntroductionThe Aurora Box is a versatile surveillance device that provides remote monitoring and recording capabilities for your home or business. This guide will walk you through the step-by-step process of installing and configuring your Aurora Box for optimal surveillance performance.

Prerequisites* Aurora Box
* PoE (Power over Ethernet) switch or adapter
* Ethernet cable
* Camera compatible with the Aurora Box
* Computer or laptop with an Ethernet connection

Step 1: Mount the Aurora Box* Choose a suitable location for your Aurora Box with adequate ventilation and protection from weather elements.
* Use the provided mounting bracket to secure the box to a wall or ceiling.

Step 2: Connect Power* Connect the PoE switch or adapter to a power outlet.
* Use the Ethernet cable to connect the PoE switch or adapter to the "POE" port on the Aurora Box.

Step 3: Connect Ethernet* Connect the Ethernet cable from the PoE switch or adapter to the "LAN" port on the Aurora Box.

Step 4: Connect Camera* Connect the camera's Ethernet cable to the remaining "LAN" port on the Aurora Box.

Step 5: Configure Network Settings* Open a web browser on a computer or laptop connected to the same network as the Aurora Box.
* Enter the Aurora Box's IP address (usually 192.168.0.1) into the address bar.
* Log in with the default username and password (admin/password).

Step 6: Configure Network Settings (continued)* Navigate to the "Network" tab in the Aurora Box web interface.
* Configure the DHCP settings, IP address, and other network parameters as needed.

Step 7: Configure Camera Settings* Navigate to the "Camera" tab in the Aurora Box web interface.
* Click "Add" to add the connected camera.
* Configure the camera's name, IP address, and other settings.

Step 8: Start Recording* Navigate to the "Recording" tab in the Aurora Box web interface.
* Set the recording schedule, motion detection settings, and other preferences.

Step 9: View Live Footage* Navigate to the "Live View" tab in the Aurora Box web interface.
* Select the camera to view its live footage.

Step 10: Playback Recordings* Navigate to the "Playback" tab in the Aurora Box web interface.
* Use the timeline or search function to locate and playback recorded footage.

Troubleshooting* Cannot connect to the Aurora Box: Verify network connections and IP settings.
* Camera not detected: Check camera power and connections. Update the firmware on the camera if available.
* No footage being recorded: Ensure recording settings are configured correctly and there is sufficient storage space.
* Live footage lagging: Optimize network performance by reducing interference or upgrading network equipment.

ConclusionCongratulations on successfully installing and configuring your Aurora Box surveillance system. By following these steps, you can now monitor your property remotely and have peace of mind knowing that your security is covered.

2024-10-22

Previous：Night Vision Surveillance Settings: A Comprehensive Guide

Next：How to Set Up Your PTZ Cameras