Dahua Surveillance All-in-One Machine Installation Guide362

Introduction

The Dahua Surveillance All-in-One Machine (AIOM) is a powerful and versatile surveillance solution that combines a network video recorder (NVR) and a set of IP cameras into a single, easy-to-manage system. This guide will provide you with step-by-step instructions on how to install and configure your Dahua AIOM.

Hardware Installation

Step 1: Unpack the AIOM

Remove the AIOM and all its components from the packaging.

Step 2: Mount the AIOM

Choose a suitable location for the AIOM and mount it securely using the provided screws.

Step 3: Connect the Cameras

Connect the IP cameras to the AIOM using Ethernet cables. Ensure that the cables are securely plugged into both the cameras and the AIOM.

Step 4: Connect the Display

Connect the AIOM to a monitor or TV using the provided HDMI cable.

Step 5: Connect the Power Supply

Plug the AIOM into a power outlet using the provided power adapter.

Software Installation

Step 1: Power on the AIOM

Press the power button to turn on the AIOM.

Step 2: Access the AIOM Interface

Open a web browser on a computer or mobile device connected to the same network as the AIOM. Enter the IP address of the AIOM in the address bar and press Enter.

Step 3: Create an Administrator Account

Log in to the AIOM using the default username "admin" and password "admin". Once logged in, create a new administrator account with a strong password.

Step 4: Configure the Network

Go to the "Network" tab and configure the network settings of the AIOM, including the IP address, subnet mask, and gateway.

Step 5: Configure the Cameras

Go to the "Camera" tab and add the IP cameras to the AIOM. Assign each camera a unique name and IP address.

Step 6: Configure the Recording Settings

Go to the "Storage" tab and configure the recording settings, including the recording schedule, resolution, and storage capacity.

System Configuration

Step 1: Set the Time and Date

Go to the "System" tab and set the time and date of the AIOM.

Step 2: Enable Motion Detection

Go to the "Motion Detection" tab and enable motion detection for the desired cameras. Adjust the motion detection sensitivity and other settings as needed.

Step 3: Enable Notifications

Go to the "Notification" tab and configure how the AIOM will notify you of events, such as motion detection or system failures.

Step 4: Test the System

Live view the cameras to ensure that they are working properly. Simulate motion detection events to test the notification system.

Troubleshooting

Cannot access the AIOM web interface

Ensure that the AIOM is connected to the network and has a valid IP address. Check the network settings and firewall rules.

No video from the cameras

Check the Ethernet connections between the cameras and the AIOM. Ensure that the cameras are powered on and configured with the correct IP addresses.

Motion detection not working

Check the motion detection settings and adjust the sensitivity as needed. Ensure that the cameras have a clear view of the monitored area.

Conclusion

By following these steps, you can successfully install and configure your Dahua Surveillance All-in-One Machine. This powerful and versatile system will provide you with reliable and efficient video surveillance for your home or business.

2024-11-06

Previous：Where to Find Temperature Monitoring in Settings

Next：How to Set Up a Helicopter Drone Monitoring System