How to Wire a Hikvision Surveillance Crystal Head with 8 Wires336

Hikvision is a world-leading manufacturer of surveillance equipment, including security cameras, DVRs, NVRs, and more. Hikvision surveillance crystal heads are used to connect surveillance cameras to recording devices using a variety of cable types, including coaxial cable, twisted pair cable, and fiber optic cable. The type of crystal head you need will depend on the type of cable you are using.

8P8C Crystal Head

The 8P8C crystal head is the most common type of crystal head used for surveillance cameras. It is a rectangular-shaped connector with eight pins, each of which is used to carry a different signal. The pins are arranged in two rows of four, with the top row being used for data transmission and the bottom row being used for power and ground.

To wire an 8P8C crystal head, you will need the following tools and materials:
8P8C crystal head
Wire strippers
Crimping tool
Twisted pair cable

First, cut the twisted pair cable to the desired length. Then, strip the outer jacket off the cable to expose the four pairs of wires. Next, untwist the wires and straighten them out. Finally, insert the wires into the crystal head in the correct order, as shown in the diagram below.

Once the wires are in place, use the crimping tool to crimp the crystal head onto the cable. Make sure to crimp the crystal head firmly, as a loose crimp can cause signal loss or other problems.

RJ45 Crystal Head

The RJ45 crystal head is another type of crystal head that is commonly used for surveillance cameras. It is also a rectangular-shaped connector, but it has eight pins instead of four. The pins are arranged in two rows of four, with the top row being used for data transmission and the bottom row being used for power and ground.

To wire an RJ45 crystal head, you will need the same tools and materials as you would for an 8P8C crystal head. The only difference is that you will need to insert all eight wires into the crystal head instead of just four.

Once the wires are in place, use the crimping tool to crimp the crystal head onto the cable. Make sure to crimp the crystal head firmly, as a loose crimp can cause signal loss or other problems.

Fiber Optic Crystal Head

Fiber optic crystal heads are used to connect surveillance cameras to recording devices using fiber optic cable. Fiber optic cable is a type of cable that uses light to transmit data. It is often used for long-distance surveillance applications, as it is less susceptible to signal loss than coaxial cable or twisted pair cable.

To wire a fiber optic crystal head, you will need the following tools and materials:
Fiber optic crystal head
Fiber optic cable
Fiber optic stripper
Fiber optic crimping tool

First, cut the fiber optic cable to the desired length. Then, use the fiber optic stripper to remove the outer jacket and expose the fiber optic core. Next, insert the fiber optic core into the crystal head. Finally, use the fiber optic crimping tool to crimp the crystal head onto the cable.

Make sure to crimp the crystal head firmly, as a loose crimp can cause signal loss or other problems.

2024-11-05

Previous：Hikvision Security Camera Warranty: Duration and Coverage

Next：Hikvision Surveillance: Upgrading to a New NVR