Configure Intranet Host for Hikvision Surveillance Devices202

Introduction

Hikvision surveillance devices, such as IP cameras and network video recorders (NVRs), offer robust security features and remote monitoring capabilities. Configuring the intranet host allows for convenient access to the device's web interface from within the local area network (LAN). This article provides a step-by-step guide to set up the intranet host for Hikvision surveillance devices.

Prerequisites
Hikvision surveillance device (IP camera or NVR)
Access to the device's web interface
Knowledge of the device's IP address

Procedure
Access Web Interface: Open a web browser and enter the device's IP address in the address bar. You will be prompted for a username and password. Enter the default credentials or the ones you have previously set up.
Find Network Settings: Once logged in, navigate to the "Network" section in the device's settings menu. The exact location may vary depending on the device model.
Enable Intranet Host: Under the "Network" settings, locate the "Intranet Host" option. Check the box to enable it.
Enter Hostname: Specify a hostname for the device. This hostname will be used to access the device from within the LAN. It should be a unique and easy-to-remember name.
Save Changes: Click on the "Save" button to apply the intranet host settings.

Verification
Open Browser: Open a web browser on any device connected to the same LAN as the Hikvision device.
Enter Hostname: In the address bar, type the hostname you specified in the previous step, followed by the colon (:) and the default web port (usually 80 or 443).
Access Web Interface: Press Enter and you should be redirected to the web interface of the Hikvision device.

Additional Notes
The intranet host feature only works within the LAN. For remote access over the internet, a public IP address or dynamic DNS service is required.
Ensure that your firewall settings allow access to the intranet host address.
For devices with multiple network interfaces, the intranet host settings may need to be configured for each interface separately.

Conclusion

Configuring the intranet host on Hikvision surveillance devices provides a convenient and secure way to access the device's web interface from within the LAN. By following the steps outlined in this article, you can easily enable the intranet host and access your device remotely.

2024-11-03

Previous：HA Monitoring Recommendations

Next：Hikvision Monitor Alarm Settings: A Comprehensive Guide