How to Reset Hikvision Camera103

Overview

Resetting a Hikvision camera can be necessary in various situations, such as when you're experiencing technical difficulties, changing the password, or restoring the camera to its factory default settings. This guide will provide a detailed step-by-step walkthrough on how to reset your Hikvision camera.

Reset Methods

There are two main reset methods for Hikvision cameras:
Hardware Reset: Involves pressing the reset button on the camera itself.
Software Reset: Performed through the camera's web interface.

Hardware Reset

Step 1: Identify the Reset Button

Locate the reset button on the back or bottom of the camera. It's typically a small, recessed button labeled "Reset" or "RST."

Step 2: Press and Hold the Reset Button

Press and hold the reset button for approximately 10-15 seconds.

Step 3: Wait for LEDs to Blink

Wait for the camera's LEDs to start blinking, indicating that the reset process has begun.

Step 4: Release the Reset Button

Once the LEDs begin blinking, release the reset button.

Step 5: Wait for Camera to Reboot

The camera will reboot itself. Wait a few minutes for the process to complete.

Software Reset

Step 1: Access the Web Interface

Open a web browser and type the camera's IP address in the address bar. Enter the camera's username and password to log in.

Step 2: Navigate to System Settings

Click on "Configuration" in the left-hand menu. Then, select "System" under the "Device Management" heading.

Step 3: Click on "Restore"

Scroll down and click on the "Restore" tab.

Step 4: Select Reset Type

Under the "Restore Settings" section, select the type of reset you want to perform:
Factory Default: Restores all settings to factory defaults.
Default Config: Restores settings to the default configuration file.

Step 5: Click on "Restore" Button

Click on the "Restore" button to initiate the reset process.

Step 6: Wait for Reset to Complete

The camera will reboot itself. Wait a few minutes for the process to complete.

Additional Notes
Write down your settings before performing a reset: If you're performing a factory default reset, make sure to write down or backup your current camera settings to restore them after the reset.
Resetting the camera will erase all saved recordings: If you have important recordings stored on the camera, make sure to back them up before performing a reset.
If you encounter issues: If you encounter any issues during the reset process, power cycle the camera by unplugging and then plugging it back in.

2024-11-02

Previous：Agricultural Equipment Monitoring: Essential for Precision Farming

Next：High-Tech Monitoring Solutions for Jewelry Stores: Recommendations and Best Practices