How to Change Hikvision IP Camera Address: A Comprehensive Guide203

Hikvision IP cameras are ubiquitous in the security industry, renowned for their affordability and robust features. However, setting up and managing these cameras sometimes requires tweaking their network settings, most notably, changing their IP address. This might be necessary for several reasons: avoiding IP address conflicts on your network, optimizing network segmentation, or simply assigning a more memorable and manageable IP address. This guide will walk you through the various methods of changing the IP address of your Hikvision IP camera, catering to different levels of technical expertise and addressing common troubleshooting issues.

Method 1: Changing the IP Address via the Web Interface (Most Common Method)

This is the most common and often the easiest method. It requires accessing the camera's web interface using a web browser. Here's a step-by-step guide:
Find the Camera's Default IP Address: This is usually found on a sticker on the camera itself or in the included documentation. Common default IP addresses include 192.168.1.108, 192.168.1.64, or 10.10.10.108. If you can't locate it, consult your Hikvision documentation or use a network scanning tool (like Advanced IP Scanner or Angry IP Scanner) to locate the camera on your network.
Connect to the Camera's Network: Ensure your computer is connected to the same network as the Hikvision IP camera. This usually means connecting both to the same router via wired or wireless connection.
Open a Web Browser: Open any web browser (Chrome, Firefox, Edge, etc.) and type the camera's default IP address into the address bar. Press Enter.
Login: You'll be prompted for a username and password. The default credentials are often "admin" for both username and password. If you've changed these previously, use your custom credentials. If you've forgotten them, you might need to reset the camera to factory settings (see Method 3).
Access Network Settings: Once logged in, navigate to the camera's network settings. The exact location of this setting might vary slightly depending on the camera model and firmware version. Look for options like "Network," "Network Settings," or "IP Address."
Change the IP Address: You'll find fields for the IP address, subnet mask, and gateway. Enter the desired IP address, subnet mask (usually 255.255.255.0), and gateway (usually your router's IP address). Ensure the new IP address is within the same subnet as your router. For example, if your router's IP is 192.168.1.1, your camera's new IP should be within the 192.168.1.x range.
Save Changes: Click the "Save," "Apply," or "OK" button to save the new IP address. The camera might reboot after saving the changes.
Access the Camera with the New IP Address: After the reboot, access the camera using its new IP address in your web browser.

Method 2: Using Hikvision's SADP Tool

Hikvision's Smart Device Management Software (SADP) is a utility that simplifies the discovery and management of Hikvision devices on a network. It can automatically detect Hikvision cameras and allows you to change their IP address without needing to know the default IP address.
Download and Install SADP: Download the SADP tool from Hikvision's official website. Install it on your computer.
Run SADP: Launch the SADP tool. It will scan your network for Hikvision devices.
Select the Camera: Choose your Hikvision IP camera from the list of detected devices.
Change IP Address: SADP provides an interface to directly modify the camera's IP address, subnet mask, and gateway.
Save Changes: Save the changes, and the camera will usually reboot automatically.

Method 3: Resetting to Factory Defaults (Use as a Last Resort)

If you've forgotten your login credentials or are experiencing other issues, you might need to reset the camera to its factory defaults. This will erase all custom settings, including the IP address, and revert it to its original state. This should be considered a last resort. Locate the reset button on your camera (often a small pinhole button) and use a paperclip or similar tool to press and hold it for about 10-15 seconds. Refer to your camera's manual for precise instructions, as the procedure might vary slightly depending on the model.

Troubleshooting Tips

If you encounter problems, consider these troubleshooting steps:
Check Network Connectivity: Ensure your computer and the camera are connected to the same network and that the network connection is stable.
Firewall Issues: Temporarily disable your firewall to see if it's blocking access to the camera.
DHCP vs. Static IP: Ensure that the IP address you're assigning is not already in use on your network. If you're using DHCP (automatic IP assignment), consider setting a static IP address for the camera to avoid conflicts.
DNS Issues: If you encounter DNS resolution problems, try using the IP address directly instead of the hostname.
Firmware Updates: Ensure your camera's firmware is up-to-date. Outdated firmware can sometimes cause network connectivity problems.

By following these steps and troubleshooting tips, you should be able to successfully change the IP address of your Hikvision IP camera. Remember to always consult your camera's manual for specific instructions and to exercise caution when modifying network settings.

2025-03-24

Previous：Top 5 Non-Tracking Surveillance Software Options for Enhanced Security Without Privacy Compromise

Next：Hikvision Network Camera Password Recovery: A Comprehensive Guide