How to Add Surveillance Cameras to a Hikvision NAS165

Hikvision NAS devices are powerful network-attached storage solutions that can be used to store and manage surveillance footage from IP cameras. Adding surveillance cameras to a Hikvision NAS is a relatively simple process, but there are a few things you need to do in order to ensure that everything is set up correctly.

Step 1: Gather Your EquipmentBefore you begin, you will need to gather the following equipment:
* A Hikvision NAS
* One or more IP cameras
* Ethernet cables
* A power supply for each camera

Step 2: Connect the Cameras to the NASOnce you have gathered your equipment, you need to connect the cameras to the NAS. To do this, simply use the Ethernet cables to connect the cameras to the NAS's PoE ports. PoE (Power over Ethernet) allows the NAS to provide power to the cameras over the same cable that is used for data transmission.

Step 3: Configure the NASOnce the cameras are connected to the NAS, you need to configure the NAS to recognize and record the footage from the cameras. To do this, log in to the NAS's web interface and navigate to the "Surveillance" tab.
In the "Surveillance" tab, you will see a list of all the cameras that are connected to the NAS. Select the cameras that you want to add and click the "Add" button.
The NAS will now prompt you to enter the following information for each camera:
* The camera's IP address
* The camera's username and password
* The camera's stream URL
Once you have entered this information, click the "Save" button.

Step 4: View the FootageOnce the cameras have been added to the NAS, you can view the footage from the cameras by logging in to the NAS's web interface and navigating to the "Surveillance" tab.
In the "Surveillance" tab, you will see a list of all the cameras that are connected to the NAS. Click on the camera that you want to view the footage from.
The NAS will now display the live footage from the camera. You can also use the controls at the bottom of the screen to playback recorded footage or to take a snapshot.

TroubleshootingIf you are having problems adding surveillance cameras to your Hikvision NAS, there are a few things you can check:
* Make sure that the cameras are connected to the NAS using PoE ports.
* Make sure that the cameras are configured with the correct IP address, username, and password.
* Make sure that the NAS's firewall is configured to allow traffic from the cameras.
* Make sure that the NAS has enough storage space to record the footage from the cameras.
If you are still having problems, you can contact Hikvision's technical support for help.

2025-02-22

Previous：Hikvision Surveillance Password Auto-Modification Guide

Next：Hikvision Surveillance: No Playback Available