Hikvision Coaxial Surveillance Cable Color Codes177

When installing or troubleshooting a Hikvision coaxial surveillance system, it's important to be aware of the cable color codes. These codes are used to identify the different wires within the cable and ensure that they are properly connected. Failure to follow the color codes can result in poor video quality or even system failure.

Here is a table of the Hikvision coaxial surveillance cable color codes:

Wire Color
Signal


Red
Video+


Black
Video-


White
Ground


Shield
Shield

The video+ wire is the positive wire for the video signal, while the video- wire is the negative wire. The white wire is the ground wire, and it is used to shield the video signal from interference. The shield is a braided metal sleeve that surrounds the other wires and provides additional protection from interference.

When connecting the coaxial cable to the camera, it is important to make sure that the wires are connected to the correct terminals. The video+ wire should be connected to the video+ terminal on the camera, and the video- wire should be connected to the video- terminal. The ground wire should be connected to the ground terminal on the camera. The shield should be connected to the shield terminal on the camera.

If you are unsure about how to connect the coaxial cable to the camera, it is best to consult the camera's user manual. Incorrectly connecting the cables can damage the camera or the surveillance system.

Additional Information

In addition to the four wires listed above, some Hikvision coaxial surveillance cables also include a fifth wire. This wire is typically used for power. If your cable has a fifth wire, it is important to connect it to the power terminal on the camera.

Hikvision coaxial surveillance cables are available in a variety of lengths and thicknesses. The length of the cable you need will depend on the distance between the camera and the recording device. The thickness of the cable will depend on the amount of video traffic that will be transmitted over the cable.

When choosing a Hikvision coaxial surveillance cable, it is important to consider the following factors:
The length of the cable
The thickness of the cable
The number of wires in the cable
The type of connectors on the cable

By following these tips, you can choose the right Hikvision coaxial surveillance cable for your needs.

2025-02-13

Previous：How to Install Hikvision Wireless Security Cameras

Next：Hikvision iVMS-3000: A Comprehensive Guide for Comprehensive Video Management