Hikvision External Power Supply Installation Guide57

IntroductionHikvision external power supplies provide convenient and reliable power to your Hikvision security cameras. They are designed to work seamlessly with Hikvision cameras and are available in a variety of wattages to meet your specific power needs.

Before You StartBefore you begin the installation, please make sure you have the following tools and materials:* Hikvision external power supplyScrewdriverWire strippersElectrical tape

Step 1: Choose a Mounting LocationChoose a mounting location for the external power supply that is protected from the elements and is close to the camera that you need to power. The mounting location should also be accessible for maintenance purposes.

Step 2: Mount the External Power SupplyMount the external power supply to the wall or ceiling using the included screws. Make sure that the power supply is securely mounted and will not be exposed to water or other hazards.

Step 3: Connect the WiresConnect the wires from the power supply to the camera using the included wire connectors. Make sure that the wires are securely connected and that the polarity is correct. The red wire should be connected to the positive terminal on the camera, and the black wire should be connected to the negative terminal.

Step 4: Test the Power SupplyOnce the wires are connected, turn on the power supply and test the camera to make sure that it is receiving power. If the camera is not receiving power, check the connections to make sure that they are secure and that the polarity is correct.

Step 5: Clean UpOnce the power supply is working properly, clean up the installation area and dispose of any excess wires or materials.

TroubleshootingIf you are having trouble installing your Hikvision external power supply, please refer to the following troubleshooting tips:* Make sure that the power supply is compatible with your camera.Check the connections to make sure that they are secure and that the polarity is correct.Make sure that the power supply is turned on.Reset the camera to factory default settings.Contact Hikvision technical support for assistance.

ConclusionFollowing these steps will help you to successfully install your Hikvision external power supply. If you have any questions or concerns, please do not hesitate to contact Hikvision technical support for assistance.

2025-02-13

Previous：Seagate SkyHawk Surveillance Hard Drive Prices

Next：Hikvision Surveillance Camera Ethernet Cabling Sequence