How to Reset Hikvision Security Devices24

Hikvision is a leading provider of security cameras, DVRs, and NVRs. Their devices are used in a wide range of applications, from home security to commercial surveillance. Like all electronic devices, Hikvision security devices can sometimes experience problems. If you are experiencing problems with your Hikvision device, resetting it to its factory default settings can often solve the problem.

There are two ways to reset a Hikvision security device:
1. Using the reset button
2. Using the web interface

Using the reset button

The reset button is a small, recessed button located on the back or bottom of the device. To reset the device, press and hold the reset button for 10 seconds. The device will then reboot and its factory default settings will be restored.

Using the web interface

You can also reset the device using the web interface. To do this, follow these steps:
1. Open a web browser and enter the IP address of the device in the address bar.
2. Enter the username and password for the device when prompted.
3. Click on the "System" tab.
4. Click on the "Maintenance" tab.
5. Click on the "Factory Reset" button.

The device will then reboot and its factory default settings will be restored.

After resetting the device

After resetting the device, you will need to reconfigure it. This includes setting the time and date, configuring the network settings, and adding cameras to the device. You can find instructions on how to configure your Hikvision device in the user manual.

Tips* If you are having problems resetting the device, try using a different web browser or clearing the cache and cookies in your browser.
* If you are still having problems, you can contact Hikvision customer support for assistance.

2025-02-12

Previous：Home Security Camera Mounting Brackets: A Comprehensive Guide

Next：How to Brighten Dark Hikvision Cameras