How to Add a Camera to Hikvision Surveillance Software290

Hikvision is a leading provider of video surveillance solutions, and their software is widely used for managing security cameras and recording footage. If you need to add a new camera to your Hikvision surveillance system, the process is relatively simple and can be completed in a few minutes.

Prerequisites* Hikvision surveillance software
* IP camera
* Ethernet cable

Step 1: Connect the Camera* Connect the Ethernet cable to the camera and to a PoE switch or router.
* Power on the camera.

Step 2: Add the Camera to the Software* Open the Hikvision surveillance software.
* Go to the "Device Management" tab.
* Click the "Add" button.
* Select "IP Camera" from the drop-down menu.
* Enter the camera's IP address, username, and password.
* Click the "OK" button.

Step 3: Configure the Camera* Once the camera has been added, it will appear in the "Device List".
* Select the camera and click the "Configure" button.
* In the "Camera Settings" tab, you can configure various settings, such as the video resolution, frame rate, and image quality.
* In the "Network Settings" tab, you can configure the camera's IP address, subnet mask, and gateway.
* In the "Event Settings" tab, you can configure the camera to send alerts when motion is detected or other events occur.
* Click the "OK" button to save your changes.

Step 4: Preview the Camera* Once the camera has been configured, you can preview the live video feed by clicking the "Preview" button.
* The preview window will show the live video from the camera.
* You can use the controls in the preview window to zoom in and out, pan left and right, and tilt up and down.

Step 5: Record Footage* To record footage from the camera, click the "Record" button.
* The software will start recording footage to the specified storage location.
* You can stop recording at any time by clicking the "Stop" button.

Tips* If you are having trouble adding the camera, make sure that the camera is properly connected to the network and that you are using the correct IP address, username, and password.
* You can also use the Hikvision SADP Tool to automatically discover the camera on the network.
* If you need to change the camera's IP address, you can do so in the "Network Settings" tab of the camera's configuration menu.
* You can add multiple cameras to the Hikvision surveillance software, and you can manage all of them from a single interface.

2025-02-07

Previous：Leveraging Hikvision Surveillance for Comprehensive Monitoring Tower Solutions

Next：Hikvision Surveillance Host Monitoring Cable: A Comprehensive Guide