How to Change Wi-Fi on Hikvision Camera321

Introduction

Hikvision is a leading manufacturer of surveillance equipment, and its cameras are known for their high quality and reliability. However, if you need to change the Wi-Fi network that your Hikvision camera is connected to, you may be wondering how to do so. In this article, we will provide step-by-step instructions on how to change the Wi-Fi on your Hikvision camera.

Steps to Change Wi-Fi on Hikvision Camera
Open the SADP Tool: Download and install the SADP Tool (Search Active Devices Protocol) from the Hikvision website. This tool allows you to search for and manage Hikvision devices on your network.
Search for Your Camera: Once the SADP Tool is installed, run it and click on the "Search" button. The tool will scan your network for Hikvision devices and display them in a list.
Select Your Camera: Click on the IP address of your Hikvision camera in the list. This will open a new window with the camera's configuration options.
Go to the "Network" Settings: In the left-hand menu, click on the "Network" settings.
Configure the Wi-Fi Settings: In the "Network" settings, find the "Wi-Fi" section. Enter the SSID (network name) and password for the Wi-Fi network that you want your camera to connect to.
Click "OK": Once you have entered the Wi-Fi settings, click on the "OK" button to save the changes.
Reboot the Camera: To apply the changes, you need to reboot the camera. Click on the "Reboot" button in the top-right corner of the configuration window.

Troubleshooting

If you are having trouble changing the Wi-Fi on your Hikvision camera, here are a few troubleshooting tips:
Make sure that your camera is connected to the network: Use the SADP Tool to verify that your camera is connected to the network. If it is not, you may need to troubleshoot the network connection.
Check the Wi-Fi settings: Make sure that you have entered the correct SSID and password for the Wi-Fi network that you want your camera to connect to.
Reset the camera to factory defaults: If you are still having trouble, you can try resetting the camera to factory defaults. This will erase all of the camera's settings, so make sure to back up any important settings before doing this.

Conclusion

Changing the Wi-Fi on your Hikvision camera is a relatively simple process. By following the steps in this article, you can easily connect your camera to a new Wi-Fi network. If you encounter any problems, refer to the troubleshooting tips provided.

2025-02-05

Previous：The Ultimate Guide to Doorway Security Cameras

Next：Hikvision Surveillance Camera Common Default Passwords